Change the passcode:
1.From the Admin Setup menu, choose Passcode using the Scrolling buttons
and press the Select button
.
2.Press the CHANGE soft key, enter the current passcode, and press the ENTER soft key. If you decide not to change the passcode, press the CANCEL soft
key or the Exit button 
.
►If you enter an incorrect passcode, you will be notified to try again. ►If you make an error, press the <DEL soft key to erase the error.
3.You will be prompted to enter a new passcode. Enter a new passcode and press the SAVE soft key. You may press the CANCEL soft key or the Exit
button 
if you choose not to save the passcode.
PASSCODE
ASSIGNED
CHANGE REMOVE
ENTER CURRENT |
| |
Passcode:_ |
| |
CANCEL | <DEL | ENTER |
ENTER NEW |
| |
Passcode:_ |
| |
CANCEL | <DEL | SAVE |
►Record the passcode. If the passcode is forgotten, contact Polycom Support at www.polycom.com/ support and click on “How to Contact Support and Service” for your local support contact informa- tion.
Location Information
You can assign a location name, such as “Conference Room B” and the telephone number associated with your SoundStation2 Direct Connect.
Assigning a location name:
1.Press the Menu button 
, choose Admin Setup and press
the Select button 
, enter passcode (if required) and press the ENTER soft key. Choose Loca- tion using the Scrolling buttons
, and press the Select button
.
LOCATION
LOCATION NAME THIS PHONE #