![](/images/new-backgrounds/1277354/27735415x1.webp)
System Compatibility
SoundStation2 Direct Connect is compatible with any digital voice port on NORTEL® Meridian®, Meridian 1 (option 11 to 81),
the same manner as the default M2616 Model 20, using key number posi- tion 3 for Conference and key number position 6 for Transfer. Contact your PBX Administrator to confirm that the Conference and Transfer functions at the port are assigned to these key num- ber positions.
Setting up SoundStation2 Direct Connect
1.Insert the short Network Cable into the SoundStation2 Direct Connect Interface Module jack marked with the Network icon (). Plug the other end into the digital voice jack, as shown.
►If the connector does not fit, you will need one of the optional RJ11 to RJ45 Network Cables for con- nection to the wall jack, and for your phone should you choose that option. This cable has a smaller connector on one end, so try it both ways.
You have the option to install a Meridian series telephone along with your SoundStation2 Direct Connect:
1.Plug the Meridian Telephone cable into the jack on the Interface Mod- ule indicated by the telephone icon .
►If the connector does not fit you will need one of the optional cables as a replacement for your phone cable. This cable has a smaller connector on one end, so try it both ways.
2.Plug the long cable into the jack on the Interface Module labeled with the icon as shown.
Any digital phone supported by your telephone network can be connected to the phone jack on the Interface Module.
SoundStation2 Direct Connect User Guide - 8