Aiphone IS Series Basic setting procedure, When you have finished making all the detailed settings

Page 14

Making detailed settings to stations and control units

[System setting – Advanced station settings]

Make detailed settings for the registered stations and control units. The settings can be made to a station or control unit individually, or multiple stations of the same type at a time. The setting items differ from the station or control unit type. First select a station (or stations) or control unit, and then open the “Advanced settings” window to make the settings.

Basic setting procedure

Click Advanced station settings in the table of contents.

Click to check the station(s) or control unit where detailed settings are to be made.

*Multiple stations of the same type can be set together. (Control units should be set respectively.)

*All stations of the same type can be selected by clicking the corresponding button under [Select all by type].

Click Advanced settings .

The “Advanced settings” window for the selected station type or control unit opens.

Make the settings in the displayed windows.

For door and room sub stations

The right column of this page

For master stations

P.15

For control units

P.16

When you have finished making all the detailed settings:

Click Temporarily stored to save the current setting results temporarily.

*If you wish to cancel the setting results you have made, click a title in the table of contents or “Refresh” in the web browser menu.

Making detailed settings to door stations or room sub stations

NOTE:

Make the settings to door stations or room sub stations respectively. You cannot select a video door station, audio door station and a room sub station at the same time.

The following setting item buttons are displayed in the “Advanced settings” window.

A

B (room sub stations only)

C

*Click one of the buttons A , B and C to open the corresponding setting window, and then make the settings in the displayed window(s). See the detailed

instructions for A , B or C below.

*Click Close to close the current window and return to the previous window.

ASettings on [Called stations] setting window

Set the master station(s) that is (are) to be called from the selected station(s).

*Up to 20 master stations can be set.

1 Select the “Call priority” from the pull-down menu.

2 Click Reference to open another window, then check the target master stations, and then click Close to return to the previous window.

The selected master stations are added and displayed in the list.

*To delete a station (or stations) from the list, check the target station(s) in the list and click Delete .

3 Repeat step 2 to add more master stations.

4 Click Close to close the current window and return to the previous window.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Setting Manual Contents Manual configurations Purpose of the System SettingsAbout this Manual Setting List DhcpTitle Sub title ON/OFFSS1 DS1JAN DT1/DT2NTP System requirements for PC When connecting a PC to the central control unitStarting UP the System Connect a PC to the central control unitPassword Enter aiphone Setting the system configuration System configurationLog in to the system by setting the following items Start up the PC, and then open the browser windowMaking the System Settings Basic setting procedureDhcp Making network settings Network settingSelecting the network setting method Static IP AddressClick Control units composition in the table of contents Registering areas System setting Area registration RequiredRegistering zones System setting Zone registration Collective setting How to select multiple stationsSetting the station no. is required Other buttonsWhen you have finished making all the detailed settings Basic setting procedureClick Advanced station settings in the table of contents Settings on Called stations setting windowSettings on Other window Making detailed settings to master stationsSettings on Contact input window for room sub stations only Settings on Stations to be scan monitored windowSettings on Contact output window Select an output terminal from the pull-down menuClick Registering sound source in the table of contents Sound file specificationsRegistering daily chime schedule Chime setting Registering daily chime scheduleClick Registering sound sequences in the table of contents Click Registering daily chime schedule in the tableSettings on Individual schedule setting window Click Chime schedule setting in the table of contentsSettings on Weekly schedule setting window Downloading chime schedule dataClick Transfer schedule setting in the table of contents Click Registering daily transfer scheduleSetting the timer Timer setting When downloading setting data onto the PC Setting time and date Time and date settingDownloading/uploading setting data Setting file When uploading setting dataMaintenance
Top Page Image Contents