Aiphone IS Series operation manual Setting the timer Timer setting

Page 21

KSettings on [Weekly schedule] setting window

1)Select either [Every week] or [Every other week].

2)Set the schedule start and end dates.

*The monthly calendar is displayed by clicking

Refer calendar and you can select the start and end dates.

*If necessary, you can change the month by clicking or .

3)Set one of the registered daily transfer schedules or no schedule to each day of the week. (Select one from the pull-down menu.)

LSettings on [Individual schedule] setting window

Set an individual schedule to the target date.

*[Individual schedule] setting window will not open if you have not selected the target date on the calendar in the [Transfer schedule setting] window.

1)If necessary, you can change the date by clicking or repeatedly.

2)[Daily transfer schedule]:

Select either of the registered daily schedules (DT1 or DT2) or no schedule from the pull-down menu.

3)[Call transfer time]:

•When “DT1” or “DT2” is selected:

The call transfer time is automatically entered. If necessary, change the [Start time (hour and minute)] and [End time (hour and minute)] of transferring manually.

•When no schedule is selected: Enter the call transfer time manually.

*When the time is entered or changed manually, [Daily transfer schedule] changes to “Individual schedule”.

Setting the timer [Timer setting]

Set the time for each operation.

1 Click Timer setting in the table of contents.

2 Set the time for the following operations respectively.

*The setting range is displayed on the right side of each input box.

•[Call]:

Set the duration of call from door stations and room sub stations to [Normal], [Priority] or [Urgent].

•[Communication In Local]:

Set the duration of communication between stations.

•[Paging]:

Set the duration of paging.

•[Monitor]:

Set the duration of monitoring only one station.

•[Scan monitor: Switching]:

Set the duration of monitoring each station while scan- monitoring.

•[Contact output]:

Set the duration of chime from the external sound source 1 and 2, triggered by contact output of the central control unit (IS-CCU).

•[Door release]:

Set the duration of door release.

*If you set the time to “0”, the door is released while the door release button on the master station is held down.

3 Click Temporarily stored to save the current setting results temporarily.

*If you wish to cancel the setting results you have made, click a title in the table of contents or “Refresh” in the web browser menu.

GETTING STARTED SETTING THE SYSTEM USING THE SYSTEM

APPENDIX

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Setting Manual Contents Purpose of the System Settings About this ManualManual configurations Dhcp Setting ListON/OFF Title Sub titleDS1 SS1DT1/DT2 NTPJAN Starting UP the System When connecting a PC to the central control unitSystem requirements for PC Connect a PC to the central control unitLog in to the system by setting the following items Setting the system configuration System configurationPassword Enter aiphone Start up the PC, and then open the browser windowBasic setting procedure Making the System SettingsSelecting the network setting method Making network settings Network settingDhcp Static IP AddressRegistering areas System setting Area registration Required Registering zones System setting Zone registrationClick Control units composition in the table of contents Setting the station no. is required How to select multiple stationsCollective setting Other buttonsClick Advanced station settings in the table of contents Basic setting procedureWhen you have finished making all the detailed settings Settings on Called stations setting windowSettings on Contact input window for room sub stations only Making detailed settings to master stationsSettings on Other window Settings on Stations to be scan monitored windowSelect an output terminal from the pull-down menu Settings on Contact output windowSound file specifications Click Registering sound source in the table of contents Click Registering sound sequences in the table of contents Chime setting Registering daily chime schedule Registering daily chime schedule Click Registering daily chime schedule in the tableSettings on Weekly schedule setting window Click Chime schedule setting in the table of contentsSettings on Individual schedule setting window Downloading chime schedule dataClick Registering daily transfer schedule Click Transfer schedule setting in the table of contentsSetting the timer Timer setting Downloading/uploading setting data Setting file Setting time and date Time and date settingWhen downloading setting data onto the PC When uploading setting dataMaintenance
Top Page Image Contents