Aiphone IS Series Setting the system conﬁguration System conﬁguration, Select language

Page 9

2 Press down the "I" side of POWER switch to turn on all the control units in the system.

POWER switch

• Press down "I" side to turn on the unit.

• Press down "O" side to turn off the unit.

*Conﬁrm that the following LEDs operate as shown below.

Lights up.

Blinks

(When the system settings have

ﬁnished correctly, this LED turns from blinking (initializing) to lighting.)

3 Start up the PC, and then open the browser window.

4 Enter the static IP address (https://192.168.0.30/) or the IP address assigned by DHCP to access the web browser for settings.

*If you do not know your IP address assigned by DHCP, run “IS_IPSEARCH.exe” from the supplied CD-ROM, and then search for it.

The login window of the web browser is displayed.

5 Log in to the system by setting the following items.

•Select language

Select the language for displaying contents on the setting windows.

•ID

Enter “aiphone”.

•Password Enter “aiphone”.

•Login

Click Login to display the setting window.

*When you log in for the ﬁrst time, the [Registration] window appears. Register your system as needed when the IS-CCU is connected to the IP network.

NOTE:

Be sure not to log in to the system more than once at the same time by opening multiple browser windows on the PC.

Setting the system conﬁguration [System conﬁguration]

After logging in to the system, the [System conﬁguration] window appears.

First of all, make the setting on this window before starting the system settings.

1 Select your system between “Local system” and “Standard system (IP system)”.

2 Click Temporarily stored to save the setting result temporarily. (→P. 10)

3 Start the system settings by selecting a setting title in the table of contents on the left side of the window.

Go to the next page.

GETTING STARTED SETTING THE SYSTEM USING THE SYSTEM

APPENDIX

9

Image 9

Contents Setting Manual Contents Purpose of the System Settings About this ManualManual conﬁgurations Dhcp Setting ListON/OFF Title Sub titleDS1 SS1DT1/DT2 NTPJAN Starting UP the System When connecting a PC to the central control unitSystem requirements for PC Connect a PC to the central control unitLog in to the system by setting the following items Setting the system conﬁguration System conﬁgurationPassword Enter aiphone Start up the PC, and then open the browser windowBasic setting procedure Making the System SettingsSelecting the network setting method Making network settings Network settingDhcp Static IP AddressRegistering areas System setting Area registration Required Registering zones System setting Zone registrationClick Control units composition in the table of contents Setting the station no. is required How to select multiple stationsCollective setting Other buttonsClick Advanced station settings in the table of contents Basic setting procedureWhen you have ﬁnished making all the detailed settings Settings on Called stations setting windowSettings on Contact input window for room sub stations only Making detailed settings to master stationsSettings on Other window Settings on Stations to be scan monitored windowSelect an output terminal from the pull-down menu Settings on Contact output windowSound ﬁle speciﬁcations Click Registering sound source in the table of contentsClick Registering sound sequences in the table of contents Chime setting Registering daily chime scheduleRegistering daily chime schedule Click Registering daily chime schedule in the tableSettings on Weekly schedule setting window Click Chime schedule setting in the table of contentsSettings on Individual schedule setting window Downloading chime schedule dataClick Registering daily transfer schedule Click Transfer schedule setting in the table of contentsSetting the timer Timer setting Downloading/uploading setting data Setting ﬁle Setting time and date Time and date settingWhen downloading setting data onto the PC When uploading setting dataMaintenance