Aiphone IS Series operation manual Maintenance

Page 23

MAINTENANCE

This section describes the use of functions for the system maintenance. These functions are available on the web server.

Initializing the system [Initialization]

You can reset the system settings to factory default.

1 Access the web browser and log in. (→P. 9)

2 Click Initialization in the table of contents.

3 Click Initialization .

Downloading system log [System log]

You can acquire the system operation log.

1 Access the web browser and log in. (→P. 9)

2 Click System log in the table of contents.

3 Click Download to acquire the log from the system. 4 Confirm the log, and save it as needed.

NOTE:

The log is overwritten constantly from the oldest records.

Updating the firmware [Firmware update]

■Downloading updated firmware data

Please access our web page at http://www.aiphone.net/ and download the firmware data on the PC to update the system. For the download procedure, see the instructions on our web page.

1 Access the web browser and log in. (→P. 9)

2 Click Firmware update in the table of contents.

3 Click Update .

Another window opens.

4 Click Browse... and select the target firmware.

5 When the firmware is displayed in the window, click Upload .

When “Update firmware.” is displayed, the update process is complete.

NOTES:

•If the power is turned off while it is writing, the product will malfunction.

•The system may not operate normally while updating the firmware.

NOTE:

If the update fails, try again.

Referring to the troubleshooting guide [Troubleshooting]

1 Click Troubleshooting.

The following information appears in the window.

•Information about the online-help that you can refer to when trouble occurs in setting the system.

•Supported characters and symbols

Registering your system [Registration]

1 Click Registration in the table of contents.

2 Click Register to open the registration window, and then register your system on the window.

NOTE:

The central control unit (IS-CCU) must be connected to the IP network to register your system.

GETTING STARTED SETTING THE SYSTEM USING THE SYSTEM

APPENDIX

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Setting Manual Contents Manual configurations Purpose of the System SettingsAbout this Manual Dhcp Setting ListON/OFF Title Sub titleDS1 SS1JAN DT1/DT2NTP Connect a PC to the central control unit When connecting a PC to the central control unitStarting UP the System System requirements for PCStart up the PC, and then open the browser window Setting the system configuration System configurationLog in to the system by setting the following items Password Enter aiphoneBasic setting procedure Making the System SettingsStatic IP Address Making network settings Network settingSelecting the network setting method DhcpClick Control units composition in the table of contents Registering areas System setting Area registration RequiredRegistering zones System setting Zone registration Other buttons How to select multiple stationsSetting the station no. is required Collective settingSettings on Called stations setting window Basic setting procedureClick Advanced station settings in the table of contents When you have finished making all the detailed settingsSettings on Stations to be scan monitored window Making detailed settings to master stationsSettings on Contact input window for room sub stations only Settings on Other windowSelect an output terminal from the pull-down menu Settings on Contact output windowSound file specifications Click Registering sound source in the table of contentsClick Registering daily chime schedule in the table Chime setting Registering daily chime scheduleClick Registering sound sequences in the table of contents Registering daily chime scheduleDownloading chime schedule data Click Chime schedule setting in the table of contentsSettings on Weekly schedule setting window Settings on Individual schedule setting windowClick Registering daily transfer schedule Click Transfer schedule setting in the table of contentsSetting the timer Timer setting When uploading setting data Setting time and date Time and date settingDownloading/uploading setting data Setting file When downloading setting data onto the PCMaintenance
Top Page Image Contents