Uniden XCA750 manual Using Your Phone, Making and Receiving Calls

If the Base Unit loses power while the Handset is off the Base, the Digital Code may be erased. When this happens, the Handset will not function. To reestablish communication between the Handset and Base Unit:

1.Restore power to the Base Unit.

2.Place the Handset back on

the Base Unit. I!

3.The charge LED will blink quickly, indicating that the Digital Code has been reset.

Using Your Phone

Making and Receiving Calls

The following features of the XCA650/XCA750 phone are different depending on the Handset’s Location when you make or receive a call.

		HANDSET ON		HAN;;:; OFF
			BASE
ANSWER	Pick up Handset			Press speaker button on the
CALL	(AutoTalk)			Base Unit.
	1)	Pick up Handset
MAKE CALL	2 ) PreSS		@	fVote: You must use the
	3) Listen for dial tone			Handset to make a call.
	4) Dial the number
	Press @			Press speaker button on the
				Base Unit.
HANG	-OR-
UP
	Return Handset to Base
	(AutoStandby)
	1)	Pickup	Handset	Afofe: You must use the
REDIAL	2)	Press	@
	3) Listen for dial tone			Handset to make a call.
	4)	Press @

Note: Sometimes when you press @ to hang up the phone, you may get an error tone and the phone will not disconnect. If this happens, place the Handset on the Base Unit or press @ again while holding the Handset close to the Base Unit.

29

30