Specifications

Answering System Troubleshooting Chart

Problem			Suggestion
Answering System does not work.			l .pke sure that the Base Unit is plugged
			l Make sure the Answering System is
			turned on.
			l Press the RESET button to reset the
			system after an AC line spike.
Answering System does not answer calls.			l Set the REC TIME/ANN/4/1 switch in
			either the 4-mintue or 1 -minute position.
			l The memorv mav be full. Delete some or
			all of the saved messages.
Messages are incomplete.			l The incoming messages may be too long.
			Remind callers to leave a brief message.
			l The memory may be full. Delete some or
			all of the saved messages.
After a power failure, the outgoing message			l The answering machine has a flash
is deleted.			memory with no battery backup. Record
			our personal outgoing message again.
			7he default messages should still remain.

-			Specifications

General
Frequency Control			Phase Locked Lcop (PLL) Synthesizer
Modulation			FM
Operating Temperature			-10˚ to 50˚C
Base Unit
Receive Frequency			39.775-40.000 MHz (10 Channels)
Transmit Frequency			30.075-30.300 MHz (10 Channels)
Power Source			AAD-650U AC Adapter (N14700)
			Output: 9V, 350mA DC
			Input: 230-240V AC, 50Hz
Size			213 (W) x 140 (D) x 48 (H) mm
Weight			Approx. 667 gm

Message Counter LED flashes the letter P.	l There has been a power failure. Press
	RESET to reset the Answering System.
No sound on the Base Units eaker during	l Adjust the volume control on the side of
call monitoring or message pI)ayback	the Base Unit.
Cannot access remote call-in features from	l fv?;v?b;rure you’re using the correct PIN
another touch-tone phone.
	l Make sure that the touch-tone phone
	ou’re using can transmit the tone for at
	Yeast two seconds. If it cannot. vou mav
	have to change to another phone.	’
Cannot record outgoing message (ogm).	l The memory may be full.
	Delete some or all of the saved

Clock losses time.	l The power to the base unit has been
	interrupted.

Receive Frequency

Transmit Frequency

Power Requirements

Size

Weight

Battery

30.075-30.300MHz (10 Channels)

39.775-40.000 MHz (10 Channels) Rechargeable Ni-Cd Battery Pack 56 (W) x 68 (D) x 307 (H) mm

(w/ antenna)

Approx. 353 gm (including battery)

Reset the clock as detailed on page 41

of this owner’s manual.

memory Type memory Capacity Message Length

Digital Tapeless Recording

20 min. (nominal) (40 messages)

1 min. or 4 min. Incoming Message

(max.)

1 min. outgoing message (max.)

Specifications, Features, and availability of Optional Accessories are all subject to change without prior notice.