3. | Enter the number you want to | @)@@a@a@ |
| store (up to 16 digits). |
|
4. | If a pause is needed during | @Q |
| dialing to access a long | @@@a@a@ |
| distance service, press Q . |
|
Note: The @ button counts as one digit and lasts three seconds. Pressing @ more than once increases the length of the pause between numbers.
5.Press 0 again.
6.Enter the memory location
A tone indicates that the number is stored.
Storing a Mixed Number (Australian Model Only)
If your phone is set up for Pulse dialing you can store a mixed mode number so that you can easily access long distance services.
Use these keys to store a mixed mode number in memory with the Handset.
Note: An error tone will sound and the programming procedure will be canceled if more than 20 seconds elapse between each keystroke entry or step.
1.Remove Handset from the Base Unit.
2.Press 0 .
The talk/batt low LED blinks.
3.Enter the number to be dialed in pulse mode.
33 | 34 |