Use only the supplied [AAD- 041S] AC Adaptor. Do not use any other AC adaptor.
Do not place the power cord where it creates a trip hazard or where it could become chafed and create a fire or electrical hazard.
B. Connect the base unit
1) Connect the handset cord to the left side of the phone and the corded base handset.
2) Connect the telephone line cord to the TEL LINE Jack
Test Telephone Line Without Power
Pick up the base handset and listen for a dial tone.
If a dial tone is achieved after 2 seconds then base handset can be used during a power failure.
If there is no dial tone your telephone may be on a long line 
length in which case no dialling functions will be available 
during power failure.
3) Connect AC adaptor to the DC IN 9V jack and
to a standard 240V AC wall outlet.
4) Set the base on a desk or tabletop.
Place the corded base handset on the base.
5) Raise the antenna to a vertical position.
If your telephone outlet isn't modular, contact your
telephone company
for assistance. 
[11]