1) | After the answering system answers, the base speaker will let you hear the calls | ||||
| as the machine records the message. To adjust the volume, press | volume | |||
2) | up/ down. If you set the answering system to off, you cannot screen a call. | ||||
To answer the call, pick up the corded handset or press | on the base. | ||||
To mute the Call Screen, press the MUTE soft key or |
| . To cancel muting, press | |||
| |||||
the SCREEN soft key. |
|
|
|
| |
From the handset
Press select/ when the system is answering. To answer the call, press talk/flash or 
. The answering system will disconnect automatically.
Remote Operation
You can check, play, or delete messages when you are away from home or from another room using a handset. Additionally, you can record, select, or delete your own greeting message.
• If you press end before the answering system answers, the phone will return to standby.
• If the answering system does not answer within 6 seconds, you hear a beep and the phone will return to standby.
• When you receive a call, the remote operation is cancelled.
• You can change the handset volume during a remote operation.
• If you have new messages and old messages, after you have reviewed your new messages, you can play your old messages by pressing 
/2 again.
• To switch to normal conversation, press 
on the handset.
[66]
If you press
Select/
while another handset is screening a call, you will hear a beep and you can not screen a call.
The timestamp will not be heard until you have set the time.
When the answering system is full,
appears on
the base. You should delete some messages so that the system can record new messages. (Refer to "Deleting a Message" on page 64.)