Uniden WDECT 2345+1 owner manual Setting a Security Code, Setting the Ring Time

Ring Time

Toll Saver 4 Times

￿Through this chapter, we use Handset LCD image to describe steps.

Each time you press the CHANGE soft key, the phone switches the outgoing message between the prerecorded and the personal outgoing message.

To delete the personal greeting, press the DELETE soft key.

Setting a Security Code

You need to select a two-digit security code in order to play your messages from a
remote location. When you try to access your messages from another phone, you
must enter your security code.
1)	Press menu/del (or the MENU soft key on			Security Code
	the base). Select the Answ. Setup menu, and
	then the Security Code submenu.		8	0
2)	Enter a two-digit security code (01-99) using
3)	the number keypad (0-9).
	Press select/	(or the OK soft key on the base). You will hear a
	confirmation tone.

Setting the Ring Time

Ring Time allows you to set the number of rings the caller hears before your answering system plays the outgoing message. You can set the ring time to answer after four, six or nine rings. If you enable the Toll Saver (TS), the answering system picks up after two rings if you have new messages, and after four rings if there are none.

1) Press menu/del (or the MENU soft key). Select the Answ. Setup menu, and then the

Ring Time submenu.

[57]