Your phone may be compatible with other Uniden Digital Expandable Systems. Please visit our website at www.uniden.com.au, www.uniden.co.nz for model number confirmation.
Register the Handset
If you purchase an expansion handset (WDECT2305 model), you need to register the handset before use. Only one handset can be registered at a time.
Handsets supplied with the phone are registered to the base by the factory. When charged,
1)Before registering the extra handset, the battery pack MUST be charged for 15- 20 hours.
2)With the main base in standby mode, press the MENU soft key on the base.
3)Press /volume up/down on the base to select HS Registering, and then press the OK soft key.
4)On the handset, press and hold the #/ key for two seconds. To cancel registration, press the CANCEL soft key on the base.
5)While the handset is registering, Handset Registering will appear in the LCD. When Registration Complete is displayed, the handset has been registered to the base. If Registration Failed appears, please try these steps again. the base by following the same steps above.
The WDECT2380 expansion handset can be registered to the base by following the same steps above.
[17]