Remote Key Function
| /2 | Play incoming Messages | 7 | Memo Record/Stop** | ||
|
|
| /5 | Stop Operation | 8 | Greeting Message Record/Stop** |
| ||||||
| ||||||
| 6 | Play Greeting Message | 0 | Help | ||
** For the Memo Record and Greeting Message Record functions, the first time you enter the corresponding command, it starts the Recording function. If you want to stop the recording, enter the command again.
5) After the command has finished, you will hear intermittent beeps indicating that the system is waiting for a command. You may enter another command at this time from the chart above.
6) When you are finished, press end to exit the system.
Remote access away from home
You can operate your answering system from a remote location using any touch- tone telephone.
1) Call your telephone number and wait for the system to answer. If the answering system is off, it will answer after about ten rings and sound a series of beeps.
2) During the greeting message (or a series of beeps when the answering system is off), press # and enter your PIN code within two seconds (see “Setting a Security Code” on page 57).
3) The answering system announces the current time and the number of messages stored in memory. You hear "To play incoming messages, press
4) Enter a command within 15 seconds, each command there after must be entered within two seconds. You may select a command from the following chart:
[68]
The time stamp will not be heard until you have set the time. See "Setting Day and Time" on page 25.
The system will only playback messages for four minutes and then it returns to the command waiting mode. To continue playing your messages, press # then 2 again within 15 seconds.
If you enter an incorrect PIN code three times, you will hear a beep and the system will return to standby.
During the remote operation, Line Remote appears on the display.