Philips D750 manual Operating mode, Automatic listening-in, Timer, Setting switch on

Page 29

50

B – Answering device: 3 Programming

3.1Operating mode

1.Operating mode – announcement 1 + closing announcement

•Announcement 1 with the request to leave a message

•Signal tone, followed by recording of the message

•After recording the message: closing announcement (optional).

2.Operating mode – announcement 2

•Announcement 2, without the possibility of leaving a message.

3.Operating mode – combination of modes 1 and 2:

•With sufficient recording capacity: announcement 1 + closing announcement

•if the remaining recording capacity is less than 30 seconds: announcement 2

 

-

-

-

 

 

Select operation mode: see above -

store setting

 

 

 

 

 

 

 

 

3.2Automatic listening-in

With automatic listening in switched on, the loudspeaker is switched on during recording (on delivery: switched on).

- -

 

or

Switch on or off -

store setting

 

 

3.3Timer

You can specify a period of time in which the is automatically switched on. To do this, you specify a switch on and a switch off time as with any other timer.

-

-

-

or -

Switch on or off -

Now you enter the time period:

(display of time) -

Enter switch on time: 4 digits between 00:00 and 23:59 -

(display of time) -

Enter switch off time: 4 digits between 00:00 and 23:59 -

B – Answering device: 4 Remote control / remote polling

51

3.4Setting switch on

The announcement of the answering device begins after an adjustable number of rings (tone caller). Before the announcement starts, you can accept the call as usual. The delay can be adjusted between 1 and 5 rings (on delivery: 3 rings).

- -

(...) -

Enter the number of rings: 1 to 5 rings -

3.5Time limit for recordings

The recording time for leaving messages can be limited (30, 60, 120, 180 seconds). The limitation can also be switched off. The recording ends when the caller is silent for longer than 8 seconds or hangs up (on delivery, off).

- -

-

Select a time limit: 30, 60, 120, 180 seconds

or: ” ” for unlimited recording (speech control) -

4.1Remote control: Overview

Remote polling of recorded messages and remote control of answering device functions is possible from anywhere in the world using the public telephone network. It is performed by dialing DTMF tones (dual tone multif- requency) with a suitable telephone or a code transmitter. For this purpose, the code transmitter is held against the microphone of the handset.

Advisory tones during remote operation:

When using remote control you are informed by tones. There are three tones or tone sequences:

1 long tone: Positive acknowledgement successful input

2 short tones: Request tone: Request for the input of code digits or for the start of voice input.

4 short tones: Negative acknowledgement: Incorrect input or function

is not possible (e. g. function is barred).

Page 28 Page 30
Image 29
Page 28 Page 30
Contents SmartLine D750 Display ControlsMenu control Example Possibilities after selecting the menu itemImportant calls a SmartLine D750 speciality About this User’s Guide Table of contents a Telephone operationAnswering device Telephone operationAppendix DeliveryStart up Overview Operating overview Basic displays Initial installation Acoustic signals during operation and programmingSetting up the connection Recomendation for entering the MSNsNumber redialling with lifted handset Confirm selectionSubscriber number is now selected by the cursor and OK keys Changing the display languageOpen listening and hands-free operation First stepsDtmf signalling Handset volumeMuting RingerCamp-on busy COB IdentifyingIntercepting a telephone number Automatic callback when busyConsultation TransferConference BrokeringParking Call listEntering characters Name keys Deleting the programming of a name key Confirm cancelCall diversion Display External diversionBarriers MessagesCharges call costs Charge accounts Appointment call Setting time and dateSet-up menu overview Changing the PINChange of prefix Automatic dialing setting the pause between dialingEntering and changing MSNs Allocation of users to MSNsCall filter Call delayResetting the unit Answering device controls Entering connection type and additional featuresRecording announcements Switching the answering device on and offOverview/starting up Listening-in and taking over calls Recording a messageInfo text Replaying all recordingsDictations Adad operationRoom functions VIP functionTimer Operating modeSetting switch on Remote control OverviewInitiating remote control answering device is switched on Remote switch on of a switched off answering deviceMents first Codes for remote operationOperating mode announc Announcem. text Switch off answering deviceIndex # PIN # Message Start Adad test call Hook on Adad callCleaning Technical dataSettings on delivery CE labelPhilips Nederland B.V
Top Page Image Contents