26 | A – Telephone operation: 4 Comfort functions |
|
|
| Deleting the programming of a name key |
A – Telephone operation: 4 Comfort functions | 27 |
4.5Call diversion
| - | - |
| - |
|
| Select name key memory: | or |
| Confirm delete |
|
|
|
|
|
|
|
| Labels for the name keys |
|
| The labels for the name keys are inserted into the back of this guide. You | |
Tip | can write on them and insert them. Insert the labels straight away so that | |
| you cannot lose them. |
|
Removing the | ❶ Press down on the top edge of the cover and | |
cover | ❷ then push it downwards. This frees it at the top end. | |
| You can now remove the cover for labelling. Two labelling areas are | |
| available for each name key. |
|
| 1 | 2 |
Refitting | Reinsert the cover so that the matt side faces upwards. When doing this, | |
the cover | note the position of the insert edge (see diagram). | |
| ❶ Insert the cover first of all at the bottom end, | |
| ❷ and then let it click into place at the top. | |
|
| Wide edge |
|
| Narrow |
|
| edge |
| 1 | 2 |
Programming the diversion Note see below
Display:
Programming the diversion
Display:
Note, see below
NOTE:
4.5.1External diversion
Using the external diversion, you can divert calls to another telephone number. For external diversion you specify:
1.The MSN, which is to be diverted.
2.The type of calls (= service), which are to be diverted:
” ” for ”normal” calls or all calls.
3. | The condition, when the diversion is to be executed: ” | ” | |||
| (= without delay), delayed ( | ) or nonly when the telephone is busy | |||
| ( | ) . In the case of delayed diversion, the call is signalled for 15 | |||
| seconds and then diverted. During this time you can answer the call. | ||||
4. | The external telephone number for the diversion destination. | ||||
| - |
| - |
| - |
|
| Select MSN - | - | select service: - |
|
select operating mode: fixed, busy or delayed -
A check is made of the existing diversions. The procedure takes a few seconds (existing destination number is displayed).
Confirm change - ( erase a possible existing telephone number)
Enter destination telephone number
Switch diversion on (or off): Saving takes a few seconds
4.5.2Forwarding to pager
You can forward calls with transfer of the telephone number (i.e. identifi- cation) to a pager. The telephone number of the caller is transferred.
- | - |
|
| - | select MSN - |
Confirm change – ( | delete a possibly existing telephone number) | |
Enter destination number – | switch diversion on (or off) |
4.5.3Switching off all diversions
Using this function, you can switch off all set up diversions (“external”, and ”forward to pager”) at the same time.
- | - | - |
- | Confirm cancel | |
|
|
|
Since not all exchanges are able to support new ISDN features at the moment, you should not yet use the items: “EXTERNAL FOR MSN: ALL” and “CANCEL ALL DIVERSIONS”!