Atek electronic LG10B, LG10W After several seconds, the screen will display Push one time

Initial Setup

After several seconds, the screen will display:

Push one time.

4. Set up master passcode

THIS SECTION IS VERY IMPORTANT. MAKE SURE YOU HAVE READ IT COMPLETELY BEFORE PROCEEDING.

The screen will display:

Push one time. The screen will display:

Starting at the blinking cursor on line 3, you will enter a random 8 to 15 digit master passcode.

The master passcode consists of numbers only, so the alphanumeric character buttons on the Logio keypad input numbers only (not letters) when setting up and entering master passcodes. Therefore push alphanumeric buttons only one time to input numbers for the master passcode.

WARNING:

You will need to enter your master passcode every time you want to access your Logio, so you must not forget it. If you forget your master passcode, there is no way to reset the passcode or the Logio, and there is no way to retrieve your user IDs and passwords. A master passcode can be changed later, but only if you are already logged into Logio with the current master passcode.

Although a minimum of 8 digits are required, the more digits you use, up to the

Logio User’s Manual, page