Quick Reference Guide
BEFORE USING YOUR LOGIO THE FIRST TIME, INSTALL THE BATTERY PER THE INITIAL SETUP INSTRUCTIONS IN THIS USER’S MANUAL.
Quick Reference Guide
Add new record
To add a new record, push 
•Uppercase character: push & hold 
& push a character button
•Add a space after last character on line: push 
•Use your frequently used user IDs 1, 2, or 3: push 
2, 3, or 4 times
•Generate random password: push 
2 times; push again for another
random password or push 
or any arrow or alphanumeric button to keep
•Save record: push 
or 
with cursor on line 3
Edit record
To edit a record, navigate to the record and then push 
•Move cursor up or down one line: push 
or 
•Move cursor left or right over existing characters on line: push 
or 
(hold button for fast movement)
•Jump cursor to line 1: push & hold 
& push 
•Jump cursor to line 3: push & hold 
& push 
•Jump cursor to end of characters on line: push & hold 
& push 
•Jump cursor to beginning of line: push & hold 
& push 
•Add a space after last character on line: push 
•Insert space before or between existing characters: move cursor to where you want
to insert space, then push & hold 
& push 
•Insert a character before or between existing characters: move cursor to where you want to insert a character, then push a character button
•Delete characters: push 
one time, or push & hold to delete multiple characters
•Delete an entire line: push & hold 
& push 
Logio User’s Manual, page