Changing Setup Options
Pushing 
will allow you to try to enter and confirm the master passcode again.
If you want to start over with a new master passcode, push 
and the screen will display:
And then several seconds later it will display:
At this point you can start the master passcode changing process again by pushing
, or you can skip this setup option and go to the next one by pushing
. If you go through the process again and successfully confirm the new master passcode, or if you skip changing this setup option, the next screen will display:
And then several seconds later it will display:
Push 
if you want to skip to the next setup option (change user IDs 1, 2, and 3).
If you push 
, the screen will display your current lost & found information with the cursor flashing on the first character of line 1, or the title “Name:” will flash if you
have not set up your name. After editing line 1 or leaving it as is, push 
or 
to go to line 2 (telephone). Edit line 2 or leave it as it is, then push 
or 
. The next screen will display:
Logio User’s Manual, page 26