12Volt DS-2200 manual Activate Send Mail Function, Click the Create, Create a Profile

How to Install and Activate Mail Function

Activate Send Mail Function

Create a Profile

The Profile is the group of information services to set up the Messaging application. The information services allow you to access the Mailbox and review the Address Book. The Send Mail function will not work if there is no Profile. If the Profile exists and has already been used for sending e-mail, it is not necessary to create a new Profile.

The instructions for how to activate the Send Mail function in DSS Player Pro and create a Profile are shown below.

5

How to

Install and

Activate

1 Start the DSS Player Pro Dictation Module and click [Tools], [Options] in the menu to open the Option Setting dialog box.

2 Click the [Mail] tab and select the Profile name you want to use. If there is no Profile name, go to the next step.

3 Click the [Create].

The Setup Wizard runs and will list the Messaging applications that comply with MAPI. For example, if Groupware such as Lotus Notes, Novell GroupWise, or Microsoft Exchange is installed, these applications will be listed.

Mail Function

76

4 Select [Use the following information services] and check one application from the list.

If you want to set up a dialup connection through an Internet service provider, select [Internet E-mail] in the list. If you want to set up to use a LAN within your company, also select [Internet E-mail] in the list.

Note

The Send Mail function does not work with AOL or Internet providers that cannot open POP3 server addresses.

5 Click the [Next] and follow the instructions on each screen.

6 When the Wizard is complete, it returns to the Profile in the Option Setting dialog box.

Please make sure that the Profile name you have created using the Setup Wizard is displayed in the Option Setting dialog box. If a different profile name is displayed, switch to the Profile you have created.