Note:
LIf a power failure occurs, set the time and date again.
Press {ih}.
9
Press {>}.
L“SETTING BS” will be displayed.
8
L“SETTING BS” will be displayed.
6 Press {>}, then press {*} 2 times.
7 Enter the current day, month and year by selecting 2 digits for each.
Example: 17 May, 2004 Press {1}{7} {0}{5} {0}{4}.
LIf you make a mistake, press {C}. Digits will be cleared from the right.
Press {>}.
5
Setting the time and date
Important:
LConfirm that the AC adaptor is connected. LEnsure that w is not flashing.
1 Press {j}.
2 Press {v} repeatedly to display “SETTING BS”, then press {>}.
3 Press {*}.
4 Enter the current hour and minute by selecting 2 digits for each (24-hour time entry).
Example: 15:15 Press {1}{5} {1}{5}.
LIf you make a mistake, press {C}. Digits will be cleared from the right.
TCD430AL(E).book Page 10 Tuesday, March 30, 2004 5:27 PM
Preparation
Wall mounting
8 cm 
Screws
Hooks
Note:
LMake sure the screws are securely fastened to the wall.
LUse the following wall template to position the screws before drilling.
8 cm
10