Panasonic KX-TCD430AL Call options, Selecting the display language, Setting call bar

Press {j}.

6 Press {j} 2 times.

7 Press {>} to select “ON”, then press {ih}.

Note:

LWhen this feature is turned on, only the direct call number can be called.

LWhile this feature is turned on, the following will be displayed.

TCD430AL(E).book Page 20 Tuesday, March 30, 2004 5:27 PM

Useful Telephone Settings

2	Press {v} repeatedly to display			BAR”, then press {>}.
3	“SETTING HS”, then press {>}.	5		Enter “0000” (default handset PIN).
	Press {v} repeatedly to display			LIf you changed PIN, enter it (page 21).
4	“DISPLAY OPT”, then press {>}.	6		Press {v} repeatedly to select “ON” or
	Press {v} repeatedly to display “TALK			“OFF”, then press {>}.
5	MODE”, then press {>}.	7		Press {ih}.
	Press {v} repeatedly to select the		Note:
	desired setting, then press {>}.
			LWhile this feature is turned on, the
6	Press {ih}.
				following will be displayed.
Selecting the display language
10 display languages are available.
			Storing the direct call number
1	Press {j}.
			Direct call allows you to dial a preset phone
2	Press {v} repeatedly to display
			number simply by pressing {C}. No dialling
	“SETTING HS”, then press {>}.
3			is necessary.
	Press {v} repeatedly to display	1		Press {j}.
	“DISPLAY OPT”, then press {>}.
4		2		Press {v} repeatedly to display
	Press {v} repeatedly to display
				“SETTING HS”, then press {>}.
	“LANGUAGE”, then press {>}.	3
5				Press {v} repeatedly to display “CALL
	Press {v} repeatedly to select the
	desired language, then press {>}.	4		OPT”, then press {>}.
6	Press {ih}.			Press {v}repeatedly to display “DIRECT
Note:		5		NO”, then press {>}.
				Enter a phone number (24 digits max.).
LIf you select a language you cannot read,
				LTo correct a mistake, press {C}. Digits
	reset the handset to its default settings
	(page 21).			are cleared from the right.

Call options

Setting call bar

This feature prohibits making outside calls. When call bar is turned on, only intercom calls and emergency calls can be made. To store emergency numbers, see page 24.

1

2Press {v} repeatedly to display

	“SETTING HS”, then press {>}.
3		Turning direct call on/off
	Press {v} repeatedly to display “CALL	1	Press {j}.
4	OPT”, then press {>}.	2	Press {v} repeatedly to display
	Press {v} repeatedly to display “CALL
			“SETTING HS”, then press {>}.

20