TCD430AL(E).book Page 15 Tuesday, March 30, 2004 5:27 PM
Telephone
Caller ID service
Important:
LThis unit is Caller ID compatible. To display the caller’s phone number, you must subscribe to Caller ID service. After subscribing to Caller ID, this unit will display caller information.
How Caller ID is displayed
The unit will display the calling party’s phone number after the first ring. You can view the caller information of the last 50 different callers.
When new calls have been received, the display will show the number of new calls.
Example: 4 new calls have been received.
LThe number of new calls will be cleared after viewing all caller information.
Note:
LWhen you receive a call from the same phone number you stored with a name in the phonebook, the display will show the stored name.
LIf the unit is connected to a PBX system, you may not receive the caller information.
LWhen the caller dialled from an area which does not provide Caller ID service, “OUT OF AREA” will be displayed.
LWhen the caller requested not to send caller information, either no information or “PRIVATE” will be displayed.
LThe display will not show caller information while using the handset for an intercom call. However, the caller information will be stored.
Call waiting and Caller ID compatible
If you subscribe to Caller ID service, your handset displays the second caller’s
information while talking. After you hear a
You can answer the second call, keeping the first call on hold. Follow Telstra or your service provider instructions using {R}.
LIf the phone number is stored in the phonebook with its name, the caller’s name will also be displayed.
LPlease contact Telstra or your service provider for details and availability in your area.
Using Caller ID type II
When you receive a second call during a conversation, you will hear a signal tone following the call waiting tone and the conversation will be interrupted or muted for a short period of time. This is not the fault of the product as these events are normal.
Note:
LThe tones are generated by the service provider.
Viewing caller information and calling back
The unit will automatically store the phone numbers of the last 50 different callers from the most recent call to the oldest. When the 51st call is received, the oldest caller information will be automatically erased. You can easily view caller information and use it to make calls.
1Press {v}.
2Press {v} repeatedly to search from the most recent caller information.
15