Guide to base unit settings

TCD430AL(E).book Page 22 Tuesday, March 30, 2004 5:27 PM

Useful Telephone Settings

For your reference, a chart of all items which can be customised for the base unit is printed below. Details of each item can be found on the corresponding pages.

Code	Feature	Page
No.	(Default setting)
{0}	Reset base unit	page
		24
{1}	Set all or selected	page
	handsets to ring (All	27
	handsets ring)

{2}	Base unit ringer	page
	volume (Medium)	22
{3}	Recall time (100 ms)	page
		22

	Pause length (3	page
	seconds)	23

{5}	Change base unit	page
	PIN (“0000”)	22
{6}	Call restriction	page
		23
	Emergency number	page
	(“000” and “106”)	24
{7}	Cancel a handset*1	page
		26
{*}	Time and date	page
		10

*1 If you cancel a handset, the base unit will “forget” the handset registration.

Base unit settings

Changing base unit PIN (Personal Identification Number)

The base unit’s default PIN is “0000”.

Important:

LIf you change the PIN, please write down your new PIN as the unit will not reveal the PIN to you. If you forget your PIN, consult your nearest Panasonic service centre.

1Press {j}.

2Press {v} repeatedly to display “SETTING BS”, then press {>}.

3Press {5}.

4Enter the current 4-digit base unit PIN.

5Enter the new 4-digit base unit PIN.

6Enter the new 4-digit base unit PIN again.

7Press {ih}.

Adjusting ringer volume

4 levels (high/medium/low/off) are available.

1Press {j}.

2Press {v} repeatedly to display “SETTING BS”, then press {>}.

3Press {2} 2 times.

4Select the desired setting by pressing {1} for low, {2} for medium, {3} for high or {0} for off.

5Press {>}, then press {ih}.

Setting recall time

Change the recall time if necessary to suit your PBX or service provider. For further information, consult your nearest Panasonic service centre.

1Press {j}.

2Press {v} repeatedly to display “SETTING BS”, then press {>}.

3Press {3}.

4Enter “0000” (default base unit PIN).

LIf you changed PIN, enter it (page 22).

5Press {2}.

6Press {1}.