Panasonic KX-TCD430AL Display options, Tone options, Selecting the standby mode display

TCD430AL(E).book Page 19 Tuesday, March 30, 2004 5:27 PM

			Useful Telephone Settings
4 Press {v} repeatedly to display the
			Display options
	desired item, then press {>}.
5 Press {v} repeatedly to select the
			Selecting the standby mode display
	desired setting from “RING TYPE 1” to
			“CLOCK”: The time and date will be
	“RING TYPE 20”, then press {>}.
6 Press {ih}.			displayed. Set the time and date beforehand
Note:			(page 10).
			“OFF”: Turns this feature off.
LIf you select one of the melody ringer
			“BS NO”: The base unit number will be
	types, the ringer will continue to sound for
			displayed.
	several seconds if the caller hangs up
			“HS NO”: The handset number will be
	before you answer. You may hear a dial
			displayed.
	tone or no one on the line when you
			1 Press {j}.
	answer a call.
			2 Press {v} repeatedly to display
Tone options			“SETTING HS”, then press {>}.
You can turn the following tones and alarms			3 Press {v} repeatedly to display
			“DISPLAY OPT”, then press {>}.
on or off.
			4 Press {v} repeatedly to display
“KEY TONE”: Tones heard when keys are
pressed. Includes confirmation tones and			“STANDBY MODE”, then press {>}.
error tones.			5 Press {v} repeatedly to select the
“CALL WAITING”: Tones heard when an			desired setting, then press {>}.
outside call is received while on an intercom			6 Press {ih}.
call.
			Note:
“RANGE ALARM”: An alarm heard when you
			LIf you subscribe to a Caller ID service, the
move out of range of a base unit during a
conversation.			display will show the number of new calls
“	”: An alarm heard when the		even if “CLOCK” has been selected (page
	BATTERY LOW	15).
batteries need to be charged.
1 Press {j}.			LIf “BS NO” is selected, the base unit
2 Press {v} repeatedly to display			number will be displayed.
			Example:
	“SETTING HS”, then press {>}.
3 Press {v} repeatedly to display “TONE
			LIf “HS NO” is selected, the handset
	OPT”, then press {>}.
4 Press {v} repeatedly to display the			number will be displayed.
	desired item, then press {>}.		Example:
5 Press {v} repeatedly to select “ON” or
	“OFF”, then press {>}.
6 Press {ih}.			Selecting the talk mode display
			“TALK TIME”: The length of the current call
			will be displayed.
			“PHONE NO”: The phone number will be
			displayed.
			1 Press {j}.

19