Panasonic KX-TCD430AL Setting all handsets to ring, Setting the selected handsets to ring

Page 27

TCD430AL(E).book Page 27 Tuesday, March 30, 2004 5:27 PM

Multi-unit Operation

Setting all or selected handsets to ring

You can select one of 3 methods to determine how the handsets ring for incoming calls.

−“1”: All handsets will ring.

−“2”: Selected handset(s) will ring.

−“3”: Selected handset(s) will ring, then all handsets will ring.

Setting all handsets to ring

1Press {j}.

2Press {v} repeatedly to display “SETTING BS”, then press {>}.

3Press {1}.

4Enter “0000” (default base unit PIN).

LIf you changed PIN, enter it (page 22).

5Press {1} to select “1”.

6Press {>}, then press {ih}.

Setting the selected handset(s) to ring

1Press {j}.

2Press {v} repeatedly to display “SETTING BS”, then press {>}.

3Press {1}.

4Enter “0000” (default base unit PIN).

LIf you changed PIN, enter it (page 22).

5Press {2} to select “2”.

LAll registered handset numbers will be displayed and the pre-selected handset number will flash.

6Press the desired handset number(s).

LThe selected handset number(s) will flash.

LTo cancel a selected handset number, press the number again. The number will stop flashing.

7Press {>}, then press {ih}.

Setting the selected handset(s) to ring before all handsets ring

1Press {j}.

2Press {v} repeatedly to display “SETTING BS”, then press {>}.

3Press {1}.

4Enter “0000” (default base unit PIN).

LIf you changed PIN, enter it (page 22).

5Press {3} to select “3”.

LAll registered handset numbers will be displayed and the pre-selected handset number will flash.

6Press the desired handset number(s).

LThe selected handset number(s) will flash.

LTo cancel a selected handset number, press the number again. The number will stop flashing.

7Press {>}.

8Press a dial key from {1} to {6} to select the number of rings before all handsets ring.

LThe selected number of rings will be shown on the right edge of the display.

9Press {>}, then press {ih}.

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Model No. KX-TCD430AL Telephone Model No Description Accessory informationIncluded accessories Additional/replacement accessoriesEnvironment Battery cautionImportant information GeneralInstructions to customer Installation Service difficulties Receiver Display Phonebook Talk Navigator Location of controlsHandset Base unitConnections Battery installationBattery charge Battery strengthTurning the power on/off Battery replacementWall mounting Redial feature Other featuresMaking calls Handset locator Answering callsTo edit/correct a mistake Editing a stored entryErasing a stored entry KeysAssigning an entry in the phonebook to a hot key Making calls using the phonebookMaking calls using a hot key Hot key quick dialViewing caller information and calling back Caller ID serviceUsing Caller ID type Call waiting and Caller ID compatibleExample Editing a caller’s phone number before calling backErasing caller information Storing caller information into the phonebook2nd menu 3rd menu Default setting Guide to handset settingsHandset settings Time alarmRinger options Tone options Selecting the standby mode displaySelecting the talk mode display Display optionsStoring the direct call number Setting call barCall options Selecting the display languageOther options Setting recall time Guide to base unit settingsBase unit settings Adjusting ringer volumeTurning on/off call restriction Setting pause lengthSetting call restriction Cancelling a restricted numberResetting the base unit to its default settings Additional base units Operating additional unitsRegistering a handset to a base unit Additional handsetsCancelling a base unit Cancelling a handsetSelecting a base unit Setting the selected handsets to ring Setting all handsets to ringTo transfer a call directly without speaking to handset HandsetTroubleshooting Technical information PIN IndexManufacturer For your future referenceCustomer Support Centre Tel. No Sales Department Panasonic Australia Pty. Limited
Top Page Image Contents