Panasonic KX-TCD430AL operating instructions Setting pause length, Setting call restriction

Page 23
Useful Telephone Settings
LTo cancel a selected handset number, press the number again. The number will stop flashing.
6 Press {>}.
7 Enter the phone number to be restricted (8 digits max.).
LIf you enter a number when a previously stored number is already displayed, the new number will erase the old number.
LTo select a different memory location, press {>} repeatedly and enter a number.

TCD430AL(E).book Page 23 Tuesday, March 30, 2004 5:27 PM

7Select the desired setting by pressing {1} for 700 ms or {2} for 100 ms.

8Press {>}, then press {ih}.

Setting pause length

1Press {j}.

2Press {v} repeatedly to display “SETTING BS”, then press {>}.

3Press {3}.

4Enter “0000” (default base unit PIN).

LIf you changed PIN, enter it (page 22).

5Press {3}.

6Select the desired setting by pressing {1} for 3 seconds or {2} for 5 seconds.

7Press {>}, then press {ih}.

Setting call restriction

You can restrict selected handsets from dialling certain phone numbers. You can assign up to 10 phone numbers (memory locations 1–10) to be restricted per handset. If a restricted number is dialled, the call will not be connected and the restricted number will flash on the display. For example, storing an area code will prevent a handset from dialling a long distance call.

1Press {j}.

2Press {v} repeatedly to display “SETTING BS”, then press {>}.

3Press {6}.

4Enter “0000” (default base unit PIN).

LIf you changed PIN, enter it (page 22).

LAll the registered handset numbers will be displayed.

LFlashing numbers indicate call restriction is turned on for the corresponding handset.

5Press the desired handset numbers.

LThe selected handset numbers will flash.

8Press {>}.

9Press {ih}.

Turning on/off call restriction

1Press {j}.

2Press {v} repeatedly to display “SETTING BS”, then press {>}.

3Press {6}.

4Enter “0000” (default base unit PIN).

LIf you changed PIN, enter it (page 22).

LHandset numbers will be displayed. Flashing numbers indicate call restriction is on; non-flashing numbers indicate call restriction is off.

5Press the desired handset numbers to turn on/off.

6Press {>}, then press {ih}.

Cancelling a restricted number

1Press {j}.

2Press {v} repeatedly to display “SETTING BS”, then press {>}.

3Press {6}.

4Enter “0000” (default base unit PIN).

LIf you changed PIN, enter it (page 22).

5Press {>} repeatedly to display the desired number.

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Model No. KX-TCD430AL Telephone Model No Description Accessory informationIncluded accessories Additional/replacement accessoriesEnvironment Battery cautionImportant information GeneralInstructions to customer Installation Service difficulties Receiver Display Phonebook Talk Navigator Location of controlsHandset Base unitConnections Battery installationBattery charge Battery strengthTurning the power on/off Battery replacementWall mounting Making calls Redial featureOther features Handset locator Answering callsTo edit/correct a mistake Editing a stored entryErasing a stored entry KeysAssigning an entry in the phonebook to a hot key Making calls using the phonebookMaking calls using a hot key Hot key quick dialViewing caller information and calling back Caller ID serviceUsing Caller ID type Call waiting and Caller ID compatibleExample Editing a caller’s phone number before calling backErasing caller information Storing caller information into the phonebook2nd menu 3rd menu Default setting Guide to handset settingsRinger options Handset settingsTime alarm Tone options Selecting the standby mode displaySelecting the talk mode display Display optionsStoring the direct call number Setting call barCall options Selecting the display languageOther options Setting recall time Guide to base unit settingsBase unit settings Adjusting ringer volumeTurning on/off call restriction Setting pause lengthSetting call restriction Cancelling a restricted numberResetting the base unit to its default settings Additional base units Operating additional unitsRegistering a handset to a base unit Additional handsetsSelecting a base unit Cancelling a base unitCancelling a handset Setting the selected handsets to ring Setting all handsets to ringTo transfer a call directly without speaking to handset HandsetTroubleshooting Technical information PIN IndexManufacturer For your future referenceCustomer Support Centre Tel. No Sales Department Panasonic Australia Pty. Limited
Top Page Image Contents