Programming
Feature | Feature | Setting code | System | Page |
| code |
| setting*1 |
|
Ring colour | {2}{3}{5} | {1}: <Colour1> | – | – |
(Ringer indicator colour) |
| {2}: Colour2 |
|
|
|
| {3}: Colour3 |
|
|
|
| {4}: Multicolour |
|
|
Ringer tone | {1}{6}{1} | – | – | 47 |
(Handset) |
|
|
|
|
Ringer volume | {1}{6}{0} |
| – | – |
(Handset) |
| {0}: Off |
|
|
Set area code | {2}{5}{5} | (page 39) | – | – |
Set dial mode | {1}{2}{0} | (page 66) | r | – |
Set line mode*5 | {1}{2}{2} | {1}: A {2}: <B> | r | – |
Set recall time*6 | {1}{2}{1} | {1}: 700 ms | r | – |
|
| {2}: 600 ms {3}: 400 ms |
|
|
|
| {4}: 300 ms {5}: 250 ms |
|
|
|
| {6}: 110 ms |
|
|
|
| {7}: <100 ms> {8}: 90 ms |
|
|
Store VM access# | {3}{3}{1} | – | r | 52 |
Talking CallerID | {1}{6}{2} | {1}: <On> {0}: Off | – | 37 |
(Handset) |
|
|
|
|
Talking CallerID | {*}{1}{6} | {1}: <On> {0}: Off | r | 37 |
(Base unit) | {2} |
|
|
|
Time adjustment*7 | {2}{2}{6} | {1}: <Caller ID[auto]> | r | – |
(Caller ID subscribers |
| {2}: Manual |
|
|
only) |
|
|
|
|
*1 If “System setting” column is checked, you do not need to programme the same item using another handset.
*2 If you subscribe to Caller ID service and want to view the caller’s information after lifting up the handset to answer a call, turn off this feature.
*3 Use either the handset or base unit to turn the dial lock on/off for all units at once (page 28).
*4 Turn this feature off if you prefer not to hear key tones while you are dialling or pressing any keys, including confirmation tones and error tones.
*5 Generally, the line mode setting should not be adjusted. If Sis not displayed or the IN USE indicator on the base unit does not light properly when another phone connected to the same line is in use, you need to change the line mode to “A”.
45