Panasonic KX-TG5961AL operating instructions Changing handset name, Erasing a melody Handset

Programming

Erasing a melody

Handset

1 {MENU} (middle soft key) i {#}{1}{6}{6}

2 “List” i{SELECT}

3 Select the desired item. i{MENU}

4 “Erase” i{SELECT}

5 “Yes” i{SELECT} i{OFF}

Note:

LIf the erased melody was used for the handset ringer tone (page 47), “Tone 1” (default) is used instead of that melody.

LIf the erased melody was assigned to certain callers as ringer ID (page 37), the ringer ID assignment is cancelled, and the handset ringer tone (page 47) is used instead of that song.

Changing handset name

Each handset can be given a customised name (“Bob”, “Kitchen”, etc.), this is useful when you make intercom calls between handsets. The default setting is “Handset 1” to “Handset 8”.

You can also select whether or not the handset name is displayed in standby mode. The default setting is “Off”.

Handset

1 {MENU} (middle soft key) i {#}{1}{0}{4}

2 Enter the desired name (max. 10 characters; page 32).

LIf not required, go to step 3.

3 {OK}

4 Select the desired setting. i{SAVE}

i{OFF}

49