Programming
| Page | ||
Base Unit Setup*1 | Ringer Volume*6 | – | – |
| <Medium> |
|
|
| Recall/Flash*7 | – | 19 |
| <600 msec.> |
|
|
| Area Code | – | 26 |
| Base Unit PIN | – | 26 |
| <0000> |
|
|
| Repeater Mode | – | 27 |
| <Off> |
|
|
*1 If you program these settings using one of the handsets, you do not need to program the same item using another handset.
*2 If you select one of the melody ringer tones, the ringer tone continues to play for several seconds even if the caller has already hung up. You may either hear a dial tone or no one on the line when you answer the call.
*3 The preset melodies in this product are used with permission of © 2007 Copyrights Vision Inc.
*4 Turn this feature off if you prefer not to hear key tones while you are dialling or pressing any keys, including confirmation tones and error tones.
*5 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up the handset to answer a call, turn off this feature.
*6
*7 The recall/flash time depends on your telephone exchange or host PBX. Contact your PBX supplier if necessary.
24