Panasonic KX-TG2344 manual If the Following Appear on Your Display, Display message Cause & Remedy

Page 72

If the Following Appear on Your Display...

The following will be displayed when the unit needs your attention.

Display message

Cause & Remedy

 

 

Recharge battery

• The battery needs to be charged. Recharge the

 

battery (p. 10).

 

 

Charge for 6h

• The battery has been discharged. The handset will

 

not work. Fully charge the battery (p. 10).

 

 

No link to base.

• The handset has lost communication with the base

Move closer to

unit. Walk closer to the base unit and try again or

base, try again.

re-register the handset (p. 48).

 

• Confirm the base unit’s AC adaptor is plugged in.

 

• Raise the base unit antenna.

 

 

Please lift up

• A handset button was pressed while the handset

and try again.

was on the base unit or charger. Lift the handset and

 

press the button again.

 

 

Busy

• The base unit and/or another handset is in use. Try

 

again later.

 

• The handset you are calling is too far from the base

 

unit. Try again later.

 

 

Error!!

• When you tried to re-register the handset, the

 

handset and base unit could not link for some

 

reason, such as interference from electrical

 

appliances. Move the handset and base unit away

 

from any electrical appliances and try again.

 

• Another handset tried to send phone book items to

 

you but the copying stopped (p. 39, 40).

 

 

Phone book full

• When you tried to store an item in the phone book,

 

the phone book memory was full. Press [OFF] to exit

 

the programming mode. To erase other items from

 

the phone book, see page 38.

 

 

System is busy.

• If the base unit or another handset is in use, such as

Please try again

conducting outside/intercom calls or listening to

later.

messages, you may not be able to use the handset.

 

Try again later.

 

• The handset you tried to send phone book items to

 

is in use.

 

• The handset has lost communication with the base

 

unit. Walk closer to the base unit and try again.

 

• The Answering System is in use, such as answering

 

a call or playing back messages. Try again later.

 

 

64

Page 71 Page 73
Image 72
Page 71 Page 73
Contents
Page Page Page Page Page Page Page Page Charge the battery for 6 hours before initial use GHz Multi-Handset Digital Cordless PhoneModel No. KX-TG2344 Pulse-or-tone dialing capability Accessories included Attach your purchase receipt here TrademarksBattery Charge For Best PerformanceBase Unit Location/Noise For assistance, please call 1-800-211-PANA7262Contents Contents Location of Controls Base unitErase Button Location of Controls HandsetCharger unit Handset soft keys Handset navigator keyBase unit display Talk 00-00-32 KVE MuteLInstallation ConnectionsInstallation Installing the Battery in the Handset Battery strengthTo replace the battery Display prompt Battery strengthInstallation Battery informationBattery replacement RechargeProgrammable Settings How to select a function item from the menuProgramming Guidelines Handset Programmable Settings Function Menu Table Handset Sub-menuProgrammable Settings Date and Time Handset For Caller ID service users pTo confirm the date and time, repeat steps 1 and 2 above Programmable Settings Display Language Handset Dialing Mode HandsetProgrammable Settings Line Mode Handset Auto Talk HandsetProgrammable Settings Ringer Volume Handset Press Menu Scroll to Ringer setting by pressing dSelect the desired volume level by pressing d or B Or B , then press SelectProgrammable Settings Ringer Tone Handset LCD Contrast HandsetScroll to Ringer tone by pressing d or B, then press Select Select the desired ringer tone by pressing d or BPreparing the Answering System Greeting Message Base UnitTo record a greeting message Preparing the Answering System Caller’s Recording Time HandsetTo review the greeting To erase the greetingNumber of Rings Handset Select the recording time by pressing d orSelect the number of rings by pressing d or B Toll saverPreparing the Answering System Message Alert Handset Scroll to Message alert by pressing d orMessage alert Off KBack dB SaveL Making Calls To have a hands-free phone conversationHands-free Digital Duplex Speakerphone To redial using the redial list Memory Redial Making CallsTo dial after confirming the entered number To redial the last number dialedTo turn this feature on, press VE during a To turn this feature off, press VE againVoice Enhancer Technology Backlit LCD display/Lighted handset keypadAnswering Calls OFF s Auto TalkTo transfer the call to another person, see Caller ID Service How Caller ID information is displayedPersonalized Name Display Display MeaningUsing the Caller List Viewing the Caller List HandsetPress Rcvd calls, d, or B to enter the Caller List Press OFF to exit the listUsing the Caller List Calling Back from the Caller ListWhat , means If a caller calls more than oncePress Select Press Edit repeatedly until the number is Shown in the desired formatTo call the edited number, press C or s To save the edited number into the phone book, press SaveUsing the Caller List Caller ID Number Auto Edit Handset To turn Caller ID Number Auto Edit on or offScroll to Caller ID edit by pressing d Select Off or On by pressing d or BPress Select 1100A JUN.12 υ3 KErase SelectLKEdit Enter nameUsing the Caller List Erasing Caller Information Handset To erase a specific callerTo erase all entries Phone Book Storing Names and Numbers HandsetIf you make a mistake when entering a name or number Phone BookSelecting characters to enter names For example, to enter TomPhone Book Dialing from the Phone Book Handset Press SearchTo search for a name by initial Press d repeatedly until the desired name is displayedChain Dial Handset Index tableWhile you are on a call Press Menu Phone Book Editing an Item in the Phone Book Handset Erasing an Item in the Phone Book HandsetPhone Book Copying Items in the Phone Book Handset To copy one phone book item to another handsetPress Menu Scroll to Copy phone book by pressing d Press Select at Copy 1 itemScroll to Copy all items by pressing d Tom Jones Receiving then Phone book Received 01/10Intercom Making Intercom CallsPress HOLD/INTERCOM Intercom Answering Intercom CallsDuring an intercom call Press C, s or HOLD/INTERCOMTransferring a Call From a Handset to another HandsetQuick call transfer To complete the transfer, press OFFConference Calls To join a conversation Call ShareDuring a call, press HOLD/INTERCOM Special Features For Call Waiting Service Users HandsetTemporary Tone Dialing Muting Your Conversation HandsetSpecial Features Using the Pause Key Flash Button HandsetFor PBX Line/Long Distance Calls Handset Selecting the flash timeSpecial Features Incoming Call Tone Handset Key Tone HandsetScroll to Incoming call. by pressing d Select On, Off or 2 by pressing d orBase unit Handset 1 RegisteredSetting the Unit to Answer Calls Base Unit Automatic Answering OperationPress Answer on to turn on the Answering System To turn the incoming call monitoring feature off To play back messages Press MessagePress Menu Press Select at Message play To end remote operation, press OFFVoice menu MENU=Call back @4 =Erase msg KRepeat SkipLListening to Messages To call back the displayed numberHelen KRepeat Skip L Helen KEdit CallLErasing Messages Erasing a specific messageErasing all messages Within 10 seconds, press Erase againRemote Operation from a Touch Tone Phone Summary of remote operationScroll to Remote code by pressing d or Enter a 2-digit remote codeTo confirm the remote code, repeat steps 1 to Remote code KBack SaveLRemote Operation from a Touch Tone Phone Voice Menu AnsweringDirect commands To turn on the Answering SystemSkipping the greeting Wall Mounting Wall Mounting Wall Template for the Charger unitConnecting an optional headset To switch to the speakerphone while using the headsetBelt Clip Optional HeadsetDirect Commands Menu item Command Selection itemsDirect Commands During programmingIf the Following Appear on Your Display Display message Cause & RemedyIf the Following Appear on Your Display Troubleshooting Problem Cause & RemedyTelephone System Troubleshooting Answering SystemTroubleshooting GeneralOpenLCR Service for Caller IQ Recharge battery isBut Recharge battery is OpenLCR Service for Caller IQ Turning Caller IQ on or off HandsetScroll to Turn CIQ off? by pressing d or Then press YesOpenLCR Service for Caller IQ Downloading Data Function setupTo create data on the openLCR web site Phone book dataOpenLCR Service for Caller IQ When downloading is complete, a beep soundsTo download data from openLCR Handset Or B, then press YesTo view information Press Menu Scroll to Caller IQ by pressing d or BPress Yes at View Info.? Scroll to the desired information by pressing Or BImportant Safety Instructions Important Safety Instructions FCC and Other Information FCC and Other Information FCC RF Exposure WarningFCC and Other Information Index Index Phone book Phone book, copyingLimited Warranty Coverage Mail-In ServiceLimited Warranty Limits And Exclusions Ave de Infanteria, KmCustomer Services Directory For your future reference For product service When you ship the productPage Page Page Page Page Page Page Page Page Page Page Page Page Page Page
Top Page Image Contents