![](/images/new-backgrounds/1141746/141746167x1.webp)
FCC and Other Information
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US:ACJ-----.
If requested, this number must be provided to the telephone company.
Registration No | (found on the bottom of the unit) |
Ringer Equivalence No. (REN) | 0.1B |
A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant.
The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company. For products approved after July 23, 2001, the REN for this product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3).
If this equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But if advance notice isn’t practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary.
The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the operation of the equipment. If this happens the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted service.
If trouble is experienced with this equipment, for repair or warranty information, please contact a Factory Servicenter or other Authorized Servicer. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved.
Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission or corporation commission for information.
If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer.
Page
Page
Page
Page
Page
Page
Page
Page
Charge the battery for 6 hours before initial use
GHz Multi-Handset Digital Cordless Phone
Model No. KX-TG2344 Pulse-or-tone dialing capability
Accessories included
Attach your purchase receipt here Trademarks
Battery Charge
For Best Performance
Base Unit Location/Noise
For assistance, please call 1-800-211-PANA7262
Contents
Contents
Location of Controls
Base unit
Erase Button
Location of Controls
Handset
Charger unit
Handset soft keys
Handset navigator key
Base unit display
Talk 00-00-32 KVE MuteL
Installation
Connections
Installation Installing the Battery in the Handset
Battery strength
To replace the battery
Display prompt Battery strength
Installation
Battery information
Battery replacement
Recharge
Programmable Settings
How to select a function item from the menu
Programming Guidelines Handset
Programmable Settings Function Menu Table Handset
Sub-menu
Programmable Settings Date and Time Handset
For Caller ID service users p
To confirm the date and time, repeat steps 1 and 2 above
Programmable Settings Display Language Handset
Dialing Mode Handset
Programmable Settings Line Mode Handset
Auto Talk Handset
Programmable Settings Ringer Volume Handset
Press Menu Scroll to Ringer setting by pressing d
Select the desired volume level by pressing d or B
Or B , then press Select
Programmable Settings Ringer Tone Handset
LCD Contrast Handset
Scroll to Ringer tone by pressing d or B, then press Select
Select the desired ringer tone by pressing d or B
Preparing the Answering System
Greeting Message Base Unit
To record a greeting message
Preparing the Answering System
Caller’s Recording Time Handset
To review the greeting
To erase the greeting
Number of Rings Handset
Select the recording time by pressing d or
Select the number of rings by pressing d or B
Toll saver
Preparing the Answering System Message Alert Handset
Scroll to Message alert by pressing d or
Message alert Off KBack dB SaveL
Making Calls
To have a hands-free phone conversation
Hands-free Digital Duplex Speakerphone
To redial using the redial list Memory Redial
Making Calls
To dial after confirming the entered number
To redial the last number dialed
To turn this feature on, press VE during a
To turn this feature off, press VE again
Voice Enhancer Technology
Backlit LCD display/Lighted handset keypad
Answering Calls
OFF s Auto Talk
To transfer the call to another person, see
Caller ID Service
How Caller ID information is displayed
Personalized Name Display
Display Meaning
Using the Caller List
Viewing the Caller List Handset
Press Rcvd calls, d, or B to enter the Caller List
Press OFF to exit the list
Using the Caller List
Calling Back from the Caller List
What , means
If a caller calls more than once
Press Select Press Edit repeatedly until the number is
Shown in the desired format
To call the edited number, press C or s
To save the edited number into the phone book, press Save
Using the Caller List Caller ID Number Auto Edit Handset
To turn Caller ID Number Auto Edit on or off
Scroll to Caller ID edit by pressing d
Select Off or On by pressing d or B
Press Select
1100A JUN.12 υ3 KErase SelectL
KEdit
Enter name
Using the Caller List Erasing Caller Information Handset
To erase a specific caller
To erase all entries
Phone Book
Storing Names and Numbers Handset
If you make a mistake when entering a name or number
Phone Book
Selecting characters to enter names
For example, to enter Tom
Phone Book Dialing from the Phone Book Handset
Press Search
To search for a name by initial
Press d repeatedly until the desired name is displayed
Chain Dial Handset
Index table
While you are on a call Press Menu
Phone Book Editing an Item in the Phone Book Handset
Erasing an Item in the Phone Book Handset
Phone Book Copying Items in the Phone Book Handset
To copy one phone book item to another handset
Press Menu Scroll to Copy phone book by pressing d
Press Select at Copy 1 item
Scroll to Copy all items by pressing d
Tom Jones Receiving then Phone book Received 01/10
Intercom
Making Intercom Calls
Press HOLD/INTERCOM
Intercom
Answering Intercom Calls
During an intercom call
Press C, s or HOLD/INTERCOM
Transferring a Call
From a Handset to another Handset
Quick call transfer
To complete the transfer, press OFF
Conference Calls
To join a conversation Call Share
During a call, press HOLD/INTERCOM
Special Features
For Call Waiting Service Users Handset
Temporary Tone Dialing
Muting Your Conversation Handset
Special Features Using the Pause Key
Flash Button Handset
For PBX Line/Long Distance Calls Handset
Selecting the flash time
Special Features Incoming Call Tone Handset
Key Tone Handset
Scroll to Incoming call. by pressing d
Select On, Off or 2 by pressing d or
Base unit
Handset 1 Registered
Setting the Unit to Answer Calls Base Unit
Automatic Answering Operation
Press Answer on to turn on the Answering System
To turn the incoming call monitoring feature off
To play back messages
Press Message
Press Menu Press Select at Message play
To end remote operation, press OFF
Voice menu
MENU=Call back @4 =Erase msg KRepeat SkipL
Listening to Messages
To call back the displayed number
Helen KRepeat Skip L
Helen KEdit CallL
Erasing Messages
Erasing a specific message
Erasing all messages
Within 10 seconds, press Erase again
Remote Operation from a Touch Tone Phone
Summary of remote operation
Scroll to Remote code by pressing d or
Enter a 2-digit remote code
To confirm the remote code, repeat steps 1 to
Remote code KBack SaveL
Remote Operation from a Touch Tone Phone Voice Menu
Answering
Direct commands
To turn on the Answering System
Skipping the greeting
Wall Mounting
Wall Mounting
Wall Template for the Charger unit
Connecting an optional headset
To switch to the speakerphone while using the headset
Belt Clip
Optional Headset
Direct Commands
Menu item Command Selection items
Direct Commands
During programming
If the Following Appear on Your Display
Display message Cause & Remedy
If the Following Appear on Your Display
Troubleshooting
Problem Cause & Remedy
Telephone System
Troubleshooting
Answering System
Troubleshooting
General
OpenLCR Service for Caller IQ
Recharge battery is
But Recharge battery is
OpenLCR Service for Caller IQ
Turning Caller IQ on or off Handset
Scroll to Turn CIQ off? by pressing d or
Then press Yes
OpenLCR Service for Caller IQ Downloading Data
Function setup
To create data on the openLCR web site
Phone book data
OpenLCR Service for Caller IQ
When downloading is complete, a beep sounds
To download data from openLCR Handset
Or B, then press Yes
To view information
Press Menu Scroll to Caller IQ by pressing d or B
Press Yes at View Info.?
Scroll to the desired information by pressing Or B
Important Safety Instructions
Important Safety Instructions
FCC and Other Information
FCC and Other Information
FCC RF Exposure Warning
FCC and Other Information
Index
Index
Phone book Phone book, copying
Limited Warranty Coverage
Mail-In Service
Limited Warranty Limits And Exclusions
Ave de Infanteria, Km
Customer Services Directory
For your future reference
For product service
When you ship the product
Page
Page
Page
Page
Page
Page
Page
Page
Page
Page
Page
Page
Page
Page
Page