Special Features
Redial/Pause Button
Intercom Button INT
Program Button
Tone Button
Recall Button
How to Use the Pause Button
(For Analogue PBX Line/Long Distance Service Users)
We recommend you press (Redial/Pause) if a pause is required for dialling with a PBX or to access a long distance service.
Ex: Line access number 9 (PBX)
9 (Redial/Pause) Phone number
•Pressing (Redial/Pause) once creates a pause.
This prevents misdialling when you redial or dial a stored number.
•Pressing (Redial/Pause) more than once increases the length of the pause between numbers.
Setting the pause timing
You can select the pause timing, 3 seconds or 5 seconds, according to your PBX requirements. The factory preset is 1 (3 seconds).
1.Press (Program), then INT (Intercom).
2.Press 3 .
3.Enter the base unit password (p. 35).
4.Press 3 .
•The current pause timing is displayed.
5.To select 5 seconds, press 2 .
OR
To select 3 seconds, press 1 .
•The setting is displayed.
6.When finished, press (Program).
•A confirmation tone sounds.
Chapter 2 Basic Operations
29