When finished, press
Enter the base unit password (p. 35).
(Program).
Clearing the Settings in Memory
On the base unit
This function enables the base unit to clear the following settings at one time. All settings will return to the default settings (shown in brackets).
– | Bell selection | 1 | (All) |
– | Dialling mode | 1 | (TONE) |
– | Pause timing | 1 | (3 seconds) |
– | Call restricted handset(s) |
| (All clear) |
– | Call restriction number(s) |
| (All clear) |
– | Base unit password |
| (0000) |
– | FLASH/EARTH mode | 1 | (FLASH) |
1 Press (Program), then INT (Intercom).
2 Press 0 .
3
4 • A confirmation tone sounds.
0- - - -
-- - - - - - - - - - -
46