30401 English
➡Before Requesting Help
Problem | Remedy |
While programming or searching, the unit starts to ring and stops the program/search.
•To answer the call, lift the handset or Z O.
•Start again from the beginning after hanging up.
The unit does not display the caller’s phone numbers.
•Other telephone equipment may be interfering with
•your phone. Disconnect them and try again.
•Other electrical appliances connected to the same outlet may be interfering with the Caller ID information. Telephone line noise may be affecting the Caller ID information.
Ï does not function. | • The handset is too far from the base unit. |
| • The handset is engaged in an outside call. |
|
|
You cannot redial. | • If the last number dialled was more than 24 digits |
| long, the number will not be redialled correctly. |
|
|
The paged handset does not answer.
•The handset is not in the same radio area.
•The handset is engaged in an outside call.
•The handset has been cancelled or has not been registered. Register the handset in the base unit (p.36).
While using the intercom, two tones | • A call is being received. To answer, Z P then |
sound. | • O. |
|
|
The unit misdials when connected to a PBX.
• Check the pause function (p.25).
You cannot register the handset in the base unit.
•The base unit has registered a maximum of 6
•handsets or the handset has registered a maximum of 4 base units.
•A wrong base unit password was entered. Enter the correct password.
•There is interference from other electrical units, locate the handset and base unit away from them.
•You must finish registration within 1 minute after the ringer tone sounds, or programming will be cancelled (p.36).
The battery strength is not | • | Check that the battery type selection is correct |
displayed correctly. | • | (p.34). |
52