Panasonic KX-TCD951EB Before Requesting Help, Does not function, You cannot redial

Page 42

Before Requesting Help

Problem

Remedy

You cannot program function items such as the dialling mode.

•Programming is not possible while the unit is in the talk or intercom mode.

•Do not pause for over 60 seconds while programming.

You cannot store a phone number in memory.

•You cannot store a phone number while the unit is in the talk or intercom mode.

•Do not pause for over 60 seconds while storing.


While programming function items or	• To answer the call, lift the handset or press			.
storing numbers, the unit starts to ring.	Start again from the beginning after hanging up.

does not function.	• The handset is too far from the base unit.
	• The handset is engaged in an outside call. Wait until
	the in use indicator (	) light goes out.

You cannot redial.	• Access numbers entered after pressing			will not

	be included when redialling.

•If the last number dialled was more than 24 digits long, the number will not be redialled.

The paged handset does not answer.

•The handset is not in the same radio area.

•The handset is engaged in an outside call.

•The handset has been cancelled or has not been registered. Register the handset in the base unit (p. 31).

While using the intercom, two tones	• A call is being received. To answer, press
sound.	twice.

The unit misdials when connected to a	• Check the pause function (p. 19).
PBX.

42

Image 42

Contents Operating Instructions Charge the batteries for about 4 hours before initial useImportant Information Ringer Equivalence Number RENMethod of connection Page Before Initial Use Battery Charge For Best PerformanceBase Unit Location Contents Selecting the Stand-by Mode Correct Use and ChargingLocation of Controls Base unitHandset Display SettingsInstalling the Batteries in the Handset IconsTelephone Line Cord Settings ConnectionsHooks To Mains Outlet AC 230-240 V, 50 Hz USE only with Panasonic AC Adaptor KX-TCA9E or KX-TCA11ERecharge Battery strengthBattery information Fully charged Medium LowPress P W R Settings Turning the Power onDisplay Power Button PWR Current connected base unit number is displayedEnsure that the dialling mode is selected tone Selecting the Dialling ModePress Prog then I N T Enter the base unit password PressF23U Settings Selecting the Handset Ringer Volume/PatternRinger volume Ringer pattern22u2 Selecting the Base Unit Ringer VolumePress the desired volume level 1 , 2 , 3 or Press Prog then I N T Press 2 TwiceI2345678 To select the receiver volumeMaking Calls 888800 00To redial after confirming the numbers in redial memory Answering CallsTo redial the last number dialled To turn the handset ringer off temporarilyDialling a Stored Number Speed DiallingStoring Phone Numbers in Memory To erase a stored numberSetting the pause timing Special FeaturesHow to Use the Pause Feature Press Prog then I N T Enter the base unit password pFor Rotary or Pulse Service Users Special Features Handset LocatorSetting the Key Lock To cancel the key lock32u Using the Recall FeatureSelecting the earth option/time break recall mode To accept the waiting call and hang up the existing callSummary of Programmable Functions F5o - - o Setting the PasswordF5o 5o - - oDirect Call Setting the Direct Call ModeTo turn OFF the direct call mode F42F4 Io To turn OFF the call prohibition modeCall Prohibition F4 IO0When you dial a restricted number To cancel the call restricted handsetsTo cancel the call restriction numbers Call RestrictionF25U0 Other Programmable SettingsF2 iU F26UF32U Other Programmable Settings Selecting the Talk Mode DisplayPress G or F to select to select the desired setting I234567890Clearing the Settings in Memory FunctionFor Optional Multi-Unit Users Operating More than One HandsetOperating More than One Base Unit F7 io RegistrationF7 iU Registering a Handset in the Base UnitSpecified base unit access Registration Selecting the Base Unit AccessAutomatic base unit access I000Enter the handset numbers you want to cancel Cancelling a HandsetCancelling a base unit Press O K Enter the handset password pF3 i0 Selecting the Stand-by Mode DisplayBell Selection Iu2Selecting first handset Iu3I03 i23456 Selecting all handsetsPaging All Handsets from the Base Unit Paging/Intercom888800 00 0 Intercom between HandsetsTransferring a call using the intercom Transferring a Call from One Handset to AnotherTransferring a call without the intercom Paging/Intercom Conference Setting the Call Waiting ToneF24U Press Prog Press G or F until F24 is displayed Press O KReplacing the Batteries Replaceshown. the batteries with new ones asUsing the Belt Clip Replacing the BatteriesTo remove the belt clip Problem Remedy Before Requesting HelpUnit does not work Does not function Be included when rediallingBefore Requesting Help You cannot redialYou cannot register the handset in the base unit Installations Environment Safety InstructionsSafety PlacementAdding Another Phone Term Definitions Model No. KX-TCD951EB Panasonic Business Systems U.KReceipt No Date of Purchase Serial NoSales Department Panasonic Business Systems U.K ManufacturerPQQX12191ZB-UK WU0699MK2079