➡Paging/Intercom
Transferring a Call using the Intercom (continued)
3.(Handset 2) When the unit rings, Z O or N to answer.
4.(Handset 1) Transferring a call Z P
•The transfer is completed or
to return to the External Call Z N.
Transferring a Call without the Intercom
This feature enables you to transfer the call to another handset without waiting for the paged handset to answer.
Eg. Handset 1 is transferring a call to Handset 2.
1.(Handset 1)
During a call, Z N (Intercom icon turns on).
•The call is put on hold.
2.(Handset 1) Z desired handset no. eg. B
•You will hear an internal ring back tone until the other handset is answered.
3.(Handset 1) Z P.
4.(Handset 2) When the unit rings, Z O to answer.
•The transfer is completed.
•If the paged handset is not answered within 30 seconds, a ring tone sounds at the paging handset. The paging handset can return to the call by pressing O.
Conference
During a call using the handset, you can make an intercom call to another handset and then combine the calls together to establish a conference call between handsets registered to the same base unit.
1.(Handset 1) During a call, Z N then enter the desired handset number eg. B.
•The call is put on hold.
•If there is no answer, Z N to return to the call.
2.(Handset 2) When the unit rings, Z O or N to answer.
3.(Handset 1) Z C to establish a conference call.
4.(Handset 1 or 2) Z P to hang up on conference call.
24