TG6511(e).book Page 47 Thursday, January 21, 2010 1:11 PM
Useful Information
Wall mounting
The base unit can be mounted on a wall by revolving the bracket to “WALL” position (default: “DESK” stand position).
Note:
L Make sure that the wall is strong enough to support the weight of the unit.
Base unit
1Turn the bracket 180 degrees counterclockwise in the “WALL” direction until a click is heard.
Bottom |
L The bracket cannot be removed. Do not turn the bracket more than 180 degrees.
2Tuck in the telephone line cord (A). Connect the AC adaptor cord and telephone line cord (B).
B
A
Hook
3Mount the unit on a wall then slide down to secure in place.
(120 V AC, 60 Hz)
1
83 mm
(31/4 inches) or
102 mm (4 inches)
|
|
|
| 2 |
Wall phone plate |
| |||
83 mm |
| 102 mm | ||
(31/ | 4 | inches) | 1 | (4 inches) |
|
|
| ||
|
|
| 2 |
|
To stand on a desk
Turn the bracket 180 degrees clockwise from the “WALL” position to the “DESK” direction until a click is heard.
Bottom |
Charger
Drive the screws (not supplied) into the wall.
25.4 mm
(1 inch)
Screws
(120 V AC, 60 Hz)
|
|
| For assistance, please visit http://www.panasonic.com/help | 47 |
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|