TG4311BX.book Page 22 Monday, November 10, 2008 9:32 AM
Programming
Feature | Feature | Setting code | System | Page |
| code |
| setting*1 |
|
Time | {2}{2}{6} | {1}: Caller ID[auto] | r | – |
adjustment*7 |
| {0}: <Manual> |
|
|
(Caller ID |
|
|
|
|
subscribers only) |
|
|
|
|
*1 If “System setting” column is checked, you do not need to program the same item using another handset.
*2 If you subscribe to Caller ID service and want to view the caller’s information after lifting up the handset to answer a call, turn off this feature.
*3 Turn this feature off if you prefer not to hear key tones while you are dialing or pressing any keys, including confirmation tones and error tones.
*4 If you select one of the melody ringer tones, the ringer tone will continue to play for several seconds even if the caller has already hung up. You may either hear a dial tone or no one on the line when you answer the call.
*5 The flash time depends on your telephone exchange or host PBX. Contact your PBX supplier if necessary.
*6 Generally, the line mode setting should not be adjusted. If “Line in use” is not displayed when another phone connected to the same line is in use, you need to change the line mode to “A”.
*7 If the Caller ID time and date display service is available in your area, this feature allows the unit to automatically adjust the date and time setting when caller information is received. To use this feature, set the date and time first.
22