Panasonic TG2258PW Programmable Functions, Function Menu Table, Useful information

Page 11

Programmable Functions

Useful information:

•If Select is pressed while “---(Goback)---” is displayed, the unit will go back to the previous menu mode. If you press the key in the main menu, the unit will exit programming mode.

•After programming is complete, the display will return to the main menu or the sub-menu depending on which menu the selected item is located. (See the menu table below.)

•You can exit programming mode any time by pressing [OFF].

•If you do not press any buttons for 60 seconds, the handset will exit programming mode.

•If the handset has lost communication with the base unit, the handset beeps

3 times and “No link to base. Place on cradle and try again.” is

displayed.

• If [ ], [] or any other buttons except [MUTE] and [OFF] is pressed while the handset is on the base unit, the handset beeps 3 times and “Please lift up and try again.” is displayed. Lift the handset and press the button again.

Function Menu Table

You can use the following functions to customize your unit. See the corresponding pages for function details.

•After pressing [MENU], you can also program menu items by direct commands ([0] to [9]) instead of using the soft keys (p. 53).

Main menu				Sub-menu I		Sub-menu II
						p. 17
				Ringer volume		p. 17
Ringer setting						p. 18
Ringer setting				Ringer tone		p. 18
				Ringer tone

Preparation

Message play		p. 44
		p. 12
Date and time

Voice enhancer p. 14

Caller IQ
Intercom	p. 38

Talk Caller ID p. 15

Initial setting

View Info.?		p. 62	* “Activate CIQ?” is
		p. 61		displayed before you
Get new Info.?				displayed before you
Get new Info.?				subscribe to openLCR
Turn CIQ off?		p. 59		subscribe to openLCR
Turn CIQ off?		p. 59		service.
		p. 16		“Turn CIQ on?” is
LCD contrast		p. 16		“Turn CIQ on?” is
		p. 15		displayed when Caller
Auto talk				displayed when Caller
Auto talk				IQ is set to off (p. 59).
		p. 31		IQ is set to off (p. 59).

Caller ID edit								p. 13
Caller ID edit					Set dial mode			p. 13
							p. 41
Set tel line					Set flash time
Set tel line					Set flash time
								p. 14
					Set line mode
					Set line mode
							p. 21
					Number of rings
					Number of rings
								p. 20
					Recording time

Set answering
								p. 48

Change language		p. 13			Remote code
					Remote code
								p. 21
					Recording mode
					Recording mode

For assistance, please call: 1-800-211-PANA(7262)

11

Image 11

Contents KX-TG2258S Charge the battery for about 6 hours before initial useTrademarks Attach your purchase receipt here Energy StarFor assistance, please call 1-800-211-PANA7262 Battery ChargeFor Best Performance Base Unit Location/NoiseContents Contents Base unit Location of ControlsHandset How to use the soft keys/navigator keyLocation of Controls Connections SettingsInstalling the Battery in the Handset To replace the batteryBattery replacement SettingsBattery strength Battery informationButtons/Keys How to select a function item from the menuProgrammable Functions Programming Guidelines HandsetUseful information Programmable FunctionsFunction Menu Table Press Save, then press OFF For Caller ID service users pProgrammable Functions Date and Time Handset Select AM or PM by pressing AM/PMProgrammable Functions Display Language Handset Dialing Mode HandsetHelpful hint Programmable Functions Line Mode HandsetAuto Talk Handset To turn the mode on while talking, press VETalking Caller ID Handset Programmable Functions LCD Contrast Handset To turn the ringer ON, press Volume or Programmable Functions Ringer VolumeSelect the desired volume level by pressing To select High preset, Medium or LOW, press Volume orScroll to Ringer tone by pressing or Preparing the Answering SystemProgrammable Functions Ringer Tone Handset Greeting Message Base UnitTo erase the greeting Preparing the Answering SystemTo record a greeting message To check the greetingTo check the pre-recorded greeting, press Greeting Check Flash Memory Message Backup Message storageCaller’s Recording Time Handset Pre-recorded greetingToll saver Recording Mode HandsetPreparing the Answering System Number of Rings Handset Hands-free Digital Duplex Speakerphone Making Calls Lighted handset keypad To adjust the receiver/speaker volume while talkingTo increase volume, press To decrease volume, press Backlit LCD displayPress SP-PHONE Making Calls Using the Base Unit Base UnitTo adjust the speaker volume 8 levels while talking To redial the last number dialed on the base unitTalk into the MIC To hang up, press SP-PHONE Answering CallsDisplay Meaning Caller ID ServiceUsing the Talking Caller ID feature Caller ID ServiceIf a caller calls more than once Using the Caller List Viewing the Caller List HandsetCalling Back from the Caller List Handset What √ meansPress Select Press Edit Caller ID Number Auto Edit Feature pScroll to the desired caller by pressing or Scroll to Caller ID edit by pressing Caller ID editPress OFF Scroll to the desired caller by pressingPress Select Press Save Then press Erase Using the Caller List Erasing Caller Information HandsetTo erase a specific caller To erase all entriesEnter a phone number, up to 32 digits Phone BookStoring Names and Numbers Handset Press AddFor example, to enter Tom If you make a mistake when entering a name or numberPhone Book Selecting characters to enter namesTo search for a name by initial Phone Book Dialing from the Phone Book HandsetIndex table Press Erase Erasing an Item in the Phone Book HandsetEdit the phone number, then press Paging the handset from the base unit Handset locator IntercomPaging the base unit from the handset From the base unit to the handset IntercomFrom the handset to the base unit Temporary Tone Dialing Special FeaturesAutomatic Security Code Setting Handset For Call Waiting Service Users Handset Base UnitScroll to Set flash time by pressing Special Features Using the Pause KeyFor PBX Line/Long Distance Calls Handset Selecting the ﬂash time HandsetPress Answer on to turn on the Answering System Setting the Unit to Answer CallsAutomatic Answering Operation Monitoring incoming callsPress MESSAGE/SLOW Talk Listening to MessagesTo play back messages Voice menu Message playTo call back the displayed number Listening to MessagesDuring playback Press 4 while the message you want to erase is being played Erasing MessagesErasing a speciﬁc message Erasing all messagesDuring a conversation, press MEMO/2WAY REC When ﬁnished, press MEMO/2WAY REC or StopRecording a Memo Message Press MEMO/2WAY RECTo check the remote code, repeat steps 1 to Remote Code HandsetSummary of remote operation Enter a 2-digit remote codeSystem Remote Operation from a Touch Tone Phone Voice MenuSkipping the greeting Direct commandsRemote Operation from a Touch Tone Phone To turn on the Answering SystemWall Mounting Optional Headset Connecting an optional headset to the handsetTo switch to the speakerphone while using the headset Belt ClipTo exit the programming, press OFF Direct CommandsDuring programming To save the setting, press the right Cordless Telephone TroubleshootingProblem Cause & Remedy Answering System TroubleshootingMEMO/2WAY REC p , or General TroubleshootingOnly To set Caller IQ from OFF to on OpenLCR Service for Caller IQ FeatureSetting Caller IQ to OFF and on Handset To set Caller IQ to OFF When Caller IQ is onFollow the web screen to create the phone book data When downloading is complete, a beep soundsTo create phone book data To download the phone book data from openLCRInformation Download Handset OpenLCR Service for Caller IQ FeatureTo update information Scroll to the desired information by pressing To view informationImportant Safety Instructions FCC and Other Information Important Safety InstructionsEvenings FCC and Other InformationFCC and Other Information Index Index Ave de Infanteria, Km Limited Warranty CoverageMail-In Service Limited Warranty Limits And ExclusionsCustomer Services Directory For your future reference SpeciﬁcationsWhen you ship the product For product service