Panasonic TG2258PW operating instructions Making Calls

To dial after confirming the entered number

1Enter a phone number.

3334444

Clear Pause

•If you misdial, press Clear. Enter the correct number.

•If a pause is required for dialing, press Pause where needed (p. 41).

•To cancel, press [OFF].

2Press [] or [].

3To hang up, press [OFF] or place the handset on the base unit.

If noise interferes with the conversation

Have the unit select a clearer channel by doing one of the following:

Press [] (Channel) if talking using [],

press [] (Channel) if talking using [], or

press CH, which is displayed when you adjust receiver or speaker volume (p. 24).

OR

Walk closer to the base unit.

To redial the last number dialed

Press [] or [], then press

[REDIAL].

Making Calls

To redial using the redial list (Memory Redial)

The last 5 phone numbers dialed with the handset are stored in the redial list.

1Press [REDIAL].

333-4444

Exit >> Erase

•The last number dialed is displayed.

2Scroll to the desired number by

pressing [ >] or [> ].

•You can also scroll through the list by pressing [REDIAL].

•To exit the list, press [OFF] or

Exit.

3 Press [] or [].

•To erase an item, scroll to the desired item then press Erase.

•If “No items stored” is displayed, the list is empty.

To put a call on hold

Press Hold during a conversation.

Talk

00-00-08

(VE) Hold

•“Hold” is displayed.

•To transfer the call to the base unit, see page 39.

To return to the call, press [] or [].

•The base unit user can return to the call by pressing [SP-PHONE].

•If another phone is connected on the same line, you can also return to the call by lifting its handset.

•If a call is kept holding for 6 minutes, an alarm tone will start to sound. After 4 additional minutes on hold, the call will be disconnected.

•The alarm volume corresponds to the ringer volume level (p. 17). If the ringer is OFF, the alarm will sound at the LOW level.

Cordless Telephone

For assistance, please call: 1-800-211-PANA(7262)

23