Panasonic KX-TG2432AL, KX-TG2431AL operating instructions Answering system settings, Remote code

Press {MENU}.

TG2431AL_2432AL(e).book Page 46 Tuesday, March 15, 2005 6:37 PM

Answering System Features

*1 If pushed within the first 5 seconds of a message, the previous message will be played.

*2 To resume operation, enter a remote command within 15 seconds, or the voice guidance will start.

Turning on the answering system remotely

If the answering system is off, you can turn it on remotely.

1 Dial your phone number.

2 Let the phone ring 15 times.

LThe unit will answer your call with the greeting message.

LYou can hang up, or if you call from a touch tone phone, you can enter your remote code and begin remote operation (page 45).

Skipping the greeting message to leave a message

You can leave a message just as any outside caller can. Call your phone number, then press {*} to skip the greeting message and record your message after the beep.

Answering system settings

Remote code

A remote code must be entered when operating the answering system remotely. This code prevents unauthorised parties from listening to your messages remotely. Store any 2-digit number (00–99). The default setting is “11”.

1

2 Scroll to “Initial setting” by pressing {V} or {^}, then press {>}.

3 Scroll to “Set answering” by pressing {V} or {^}, then press {>}.

4 Scroll to “Remote code” by pressing {V} or {^}, then press {>}.

5 Select the desired remote code by entering a 2-digit number (00–99).

6 Press {Save}, then press {OFF}.

Note:

LTo confirm the remote code, repeat steps 1 to 4. Press {OFF} when finished.

46