Panasonic KX-TG2431AL Battery charge, Power failure, Recharge battery is, But Recharge

Page 57

TG2431AL_2432AL(e).book Page 57 Tuesday, March 15, 2005 6:37 PM

	Useful Information

Battery charge

Problem	Cause & solution
“Recharge battery” is	LFully charge the battery (page 11).
displayed, 7flashes
or the handset beeps
intermittently.

“Charge for 6h” and	LThe battery has been discharged. Fully charge the
8are displayed and	battery (page 11).
the handset does not
work.

I charged the battery fully,	LClean the charge contacts and charge again (page 11).
but “Recharge	LThe battery may need to be replaced (page 12). If you
battery” is still	install a new battery, fully charge it (page 11).
displayed and/or 7
continues to flash, or
“Charge for 6h” and
8are displayed.
The CHARGE indicator	LThis is normal.
does not go out after the
battery has been
charged.

The handset display is	LConfirm that the battery is properly installed.
blank.	LFully charge the battery (page 11).


Power failure

Problem	Cause & solution
The unit will not function.	LThis product is not designed to make calls in the event
	of a power failure. We recommend connecting a
	standard telephone to the same telephone line in the
	event that emergency calls need to be made during a
	power failure (page 9).

57

Image 57

Contents Model No. KX-TG2432AL Charge the battery for 6 hours before initial useIntroduction Useful Information Your phone IntroductionIncluded accessories Accessory items Quantity Accessory informationInstallation Important safety instructionsMedical BatteryBase unit location/noise For best performanceEnvironment Routine careConnections Base unitCharger KX-TG2432AL only If you subscribe to an Adsl service Battery installationBattery strength Battery chargeBattery icon Battery strength Recharging the batteryBattery performance Battery replacementRecharge battery Operation Operating timeStop Answer on indicator Message indicator Greeting REC RecordingControls and displays ControlsMenu OFF Mute Clear Hold Intercom Ringer indicator Message indicator Receiver DisplayDisplay RcvdCalls Conf KBack dB SelectL Setting the date and timeDate31.12.2005 Time1200 AM KAM/PM SaveL Date15.06.2005 Time1200 AM KAM/PM SaveLKRecall CallL Making callsAnswering calls To make a call using the redial listAuto talk Temporary ringer offHold button Useful features during a callMute button Voice enhancerClarity booster Pause button for PBX/long distance service usersCall share KX-TG2432AL only Recall buttonAdding items to the phonebook Using the phonebookTo edit/correct a mistake Calling someone in the phonebook=Name search dB=Scroll list To search for a name by initialChain dial feature Copying phonebook items KX-TG2432AL onlyDuring an outside call, press Menu TG2431AL2432ALe.book Page 24 Tuesday, March 15, 2005 637 PM Caller ID features Using Caller ID serviceCall waiting and Caller ID compatible For Caller ID Type II usersViewing the caller list and calling back Caller listMissed Calls Rcvd Phone Kcalls Book L Example Jack Smith 310P 29JUN 0555333444 310P 29JUNErasing caller information Before calling backStoring caller information into PhonebookFor KX-TG2431AL users IntercomFrom the handset to the base unit Handset Base unit Press LOCATOR/INTERCOM to answer HandsetFrom one handset to the other handset For KX-TG2432AL usersConference calls KX- TG2432AL only Main menu Sub-menu Guide to handset programmingRinger settings Handset ringer volumeRinger volume Low High KBack dB SaveL Handset ringer tone Handset interrupt toneRinger tone 1=Tone KBack dB SaveL Display options Call optionsAuto talk Handset LCD contrastLine mode Telephone settingsRecall time Storing your area codeDial lock Other optionsHandset key tone Re-registering the handsetTime adjustment Caller ID subscribers only Programming via direct commands Direct commands chartFeature Feature code Setting code TG2431AL2432ALe.book Page 39 Tuesday, March 15, 2005 637 PM Answering system Erasing your greeting message To turn off the call screening featurePre-recorded greeting message Screening your callsListening to messages Listening to messages using the base unitAnswering system commands Listening to messages using the handsetKey Command Select OFFCalling back Caller ID subscribers only Memory capacityRemote commands Using the answering system remotelyKey Remote command Remote operationRemote code Answering system settingsTurning on the answering system remotely Skipping the greeting message to leave a messageRing count For Telstra Homeline service subscribersMessage alert Caller’s recording timeHeadset optional Belt clipTo attach the belt clip To remove the belt clip To connect an optional headset to the handsetWall mounting Base unitWall mount template for the base unit Wall mount template for the charger Charger KX-TG2432AL onlyError messages Problem Cause & solution Programmable settingsGeneral use Link to base. MoveMaking/answering calls, Intercom Caller ID Answering system Power failure Battery chargeRecharge battery is But RechargeInstructions to customer Service difficulties Handset Technical informationIndex General use 53 Making/answering calls, Intercom TG2431AL2432ALe.book Page 63 Tuesday, March 15, 2005 637 PM Manufacturer Copyright Sales Department Panasonic Australia Pty. Limited