Panasonic VL-SV30BX Features during a call or while monitoring, Adjusting the display brightness

Page 11

Doorphone

Features during a call or while monitoring

Adjusting the display brightness

1 Press {MENU}, then select “BRIGHTNESS” by pressing {MENU} (▲SELECT).

2 Adjust the brightness by pressing {MONITOR} (DARK) or {PLAY} (BRIGHT).

Hiding the guidance

You can hide the operation guidance and button guidance (page 7).

1 Press {MENU}, then select “GUIDE OFF” by pressing {MENU} (▲SELECT).

2 Press {MONITOR} (OK).

LThe guidance disappears from the display temporarily. It reappears when you perform another operation.

Adjusting the volume of your voice heard at the door station

You can adjust the volume of your voice heard at the door station by setting the main monitor station.

1 Press {MENU}, then select “OUTGOING VOL” by pressing {MENU} (▲SELECT).

2 Adjust the volume by pressing {MONITOR} (-)or

{PLAY} (+).

Adjusting the speaker volume

1 Press {MENU}, then select “INCOMING VOL” by pressing {MENU} (▲SELECT).

2 Adjust the volume by pressing {MONITOR} (-)or {PLAY} (+).

If it is difficult to hear the visitor’s voice due to noise (Press-to-talk mode)

You can speak with the visitor alternately by pressing {TALK/OFF} to switch between the talking mode and the receiving mode.

1 Press and hold {TALK/OFF} for about 2 seconds during a call until a beep sounds. L appears on the display.

2 To speak to the visitor: Speak while pressing and holding {TALK/OFF}.

To hear the visitor: Release {TALK/OFF}.

NTo end the conversation:

Tap {TALK/OFF} (for 0.8 seconds or less).

Note:

LPress-to-talk mode is canceled after the conversation ends.

Using {DOOR KEY} button

When a separate door opener is connected to the main monitor station, you can open the door using the main monitor station.

1 To open the door, press {DOOR KEY} after answering a call from the door station or while monitoring images taken by the door station.

LWhen the door is opened, is displayed.

LDoor opener allows you to open the door for the time specified in “Setting {DOOR KEY} button” on page 20.

Note:

LYou cannot open the door while receiving a call from the door station. LWhen using 2 door openers:

You can open door 1 (door opener 1) when you are talking with door station 1 or monitoring it. You can open door 2 (door opener 2) when you are talking with door station 2 or monitoring it.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Thank you for purchasing a Panasonic product Attached Installation GuideRecording IntroductionImportant Information PreparationWhen using with a lobby station Accessory informationAdditional/replacement accessories Accessory items Order numberOperating safeguards For your safetyPower connection InstallationOther information Important safety instructionsFor best performance Main monitor station Location of controlsButton guidance Monitor displayOperation guidance and button guidance Operation guidanceDoor station Menu Door KEY TALK/OFF Setting the date and timeMonitor Answering a call Answering a call by voice sensor Voice answer modeWhen using an additional door station Using Door KEY button Features during a call or while monitoringAdjusting the display brightness Adjusting the speaker volumeWhen answering a call Monitor Menu TALK/OFF When installing 2 door stationsMonitoring the outside Door station monitor To view recorded images NAuto image updateRecording an image Auto recordingPlay Manual recordingNTo view the next image Viewing recorded imagesMenu Select Recording number Recording date and time UnplayedMenu Adjusting the ringer volumeSound 1 Repeat Changing the ringer toneRinger tone patterns SoundCurrent Setting Door KEY buttonSetting Monitor Menu Changing the function settings Function listHow to change the function settings Function listDisplay ALWAYS, 3 SEC Recording Date RECORDING/PLAY Settings Play Lamp YES, no FlashingPicture Record TimingLobby Other Settings Operation ON, OFF Guide SettingsDemo Mode Delete ALL Delete ALL PICTURES, Back PicturesSystem components as of November Video intercom system Expanding your system with optional unitsPlease use only a Panasonic PBX Units required to be installed Adding a door stationUsing with Panasonic PBX Operating the door openerMonitor display Problem Cause & Solution TroubleshootingStation does not sound Others Problem Cause & Solution Conversation Problem Cause & SolutionCleaning Door station VL-V566BX SpecificationsMain monitor station VL-MV30BX Incoming VOL Function Settings Ltime and Date SettingsLinitialize Settings Ldemo Mode Guide OFF Lvoice Answer Lplay Lamp FlashingPage Attach your sales receipt here For your future reference
Top Page Image Contents