Panasonic VL-SV30BX, VL-MV30BX operating instructions Conversation Problem Cause & Solution

Page 27

 

 

 

Help

N Conversation

 

 

 

 

 

 

Problem

Cause & Solution

Page

Sound cuts in/out or fades.

LThe surroundings of the main monitor station or the door

11

 

station are noisy. Try “Press-to-talk” mode.

 

 

 

 

 

Your voice cannot be heard by

LWhen

is displayed, the “Press-to-talk” mode is activated.

11

the outside visitor. (Visitor’s voice

Only while pressing {TALK/OFF}, the outside visitor can hear

 

can be heard.)

your voice.

 

 

 

 

Voice answer mode does not

LYour voice is not loud enough or your initial reply is too long

10

operate properly.

(must be less than 1 second). Try a different voice volume or

 

 

change the length of your answer until the main monitor station

 

 

beeps.

 

 

 

 

 

 

N Ringer tone

 

 

 

Problem

Cause & Solution

The ringer tone for the door

LThe ringer volume is turned off. Turn it on.

station does not sound.

 

 

 

Page

18

N Others

Problem

Cause & Solution

Page

The main monitor station and the

LThe unit does not work during a power failure. The date and

9

door station do not work during a

time may be reset to the default setting after a power failure. In

 

power failure.

this case, set the date and time using the main monitor station

 

 

again.

 

 

 

 

L“DEMO MODE” is displayed.

LDemo mode is activated. Change the setting to “OFF”.

23

LYou cannot answer the call.

 

 

 

 

 

LThe unit does not work with

LPerform the following operation (Reset).

correct operations.

– Press and hold {MENU} and {PLAY} together for about 3

 

LThe unit does not work properly.

seconds. (Recorded images and the program settings are

 

 

not affected.)

 

 

 

 

The main monitor station does

LThe plug is disconnected from the power outlet, or it is about to

not work.

be disconnected. Disconnect the plug, and connect it securely

 

LThe display monitor does not

again. If this does not solve the problem, contact our service

 

display anything.

personnel.

 

LThe ringer tone does not sound.

 

 

LNo voices can be heard.

 

 

 

 

 

27

Image 27
Contents Thank you for purchasing a Panasonic product Attached Installation GuideRecording IntroductionImportant Information PreparationWhen using with a lobby station Accessory informationAdditional/replacement accessories Accessory items Order numberOperating safeguards For your safetyPower connection InstallationImportant safety instructions For best performanceOther information Main monitor station Location of controlsButton guidance Monitor displayOperation guidance and button guidance Operation guidanceDoor station Setting the date and time MonitorMenu Door KEY TALK/OFF Answering a call by voice sensor Voice answer mode When using an additional door stationAnswering a call Using Door KEY button Features during a call or while monitoringAdjusting the display brightness Adjusting the speaker volumeWhen answering a call When installing 2 door stations Monitoring the outside Door station monitorMonitor Menu TALK/OFF To view recorded images NAuto image updateRecording an image Auto recordingPlay Manual recordingViewing recorded images Menu SelectNTo view the next image Recording number Recording date and time UnplayedMenu Adjusting the ringer volumeSound 1 Repeat Changing the ringer toneRinger tone patterns SoundSetting Door KEY button SettingCurrent Monitor Menu Changing the function settings Function listHow to change the function settings Function listDisplay ALWAYS, 3 SEC Recording Date RECORDING/PLAY Settings Play Lamp YES, no FlashingPicture Record TimingLobby Other Settings Operation ON, OFF Guide SettingsDemo Mode Delete ALL Delete ALL PICTURES, Back PicturesSystem components as of November Video intercom system Expanding your system with optional unitsPlease use only a Panasonic PBX Units required to be installed Adding a door stationUsing with Panasonic PBX Operating the door openerMonitor display Problem Cause & Solution TroubleshootingStation does not sound Others Problem Cause & Solution Conversation Problem Cause & SolutionCleaning Specifications Main monitor station VL-MV30BXDoor station VL-V566BX Incoming VOL Function Settings Ltime and Date SettingsLinitialize Settings Ldemo Mode Guide OFF Lvoice Answer Lplay Lamp FlashingPage Attach your sales receipt here For your future reference