Panasonic VL-MV30BX, VL-SV30BX operating instructions Adjusting the ringer volume, Menu

Page 18

Programming

Adjusting the ringer volume

You can adjust the ringer volume heard when receiving calls from the door station by using the main monitor station during standby. (3 levels and “OFF” are available.)

{MONITOR}

{PLAY}

{MENU}

 

{TALK/OFF}

1 Press {MENU}, then select “RING/ANSWERING SETTINGS” by pressing {MENU} (▲SELECT).

2 Press {MONITOR} (OK), then select “RING VOLUME” by pressing {MENU} (▲SELECT).

FUNCTION SETTINGS

TIME AND DATE SETTINGS RING/ANSWERING SETTINGS RECORDING/PLAY SETTINGS

RING/ANSWERING SETTINGS

RING VOLUME

RING TONE

3 Press {MONITOR} (OK), then select the desired volume by

 

 

 

 

RING VOLUME

pressing {MENU} (▲SELECT).

 

 

HIGH

 

 

 

 

 

 

 

MEDIUM

 

Current

LOW

setting

OFF

4 Press {MONITOR} (OK).

L“r” moves to the selected item.

5 To end the operation, press {TALK/OFF}.

Note:

LYou can also adjust the ringer volume while receiving a call.

1 Press {MENU}, then select “RING VOLUME” by pressing {MENU} (▲SELECT).

RING VOLUME

2 Press {MONITOR} (-)or {PLAY} (+).*1

*1 To turn off the ringer volume for calls from the door station, press and hold {MONITOR} (-)until 2 short beeps sound.

– To turn the ringer on, press {PLAY} (+).

18

Image 18
Contents Attached Installation Guide Thank you for purchasing a Panasonic productPreparation IntroductionImportant Information RecordingAccessory items Order number Accessory informationAdditional/replacement accessories When using with a lobby stationInstallation For your safetyPower connection Operating safeguardsImportant safety instructions For best performanceOther information Location of controls Main monitor stationOperation guidance Monitor displayOperation guidance and button guidance Button guidanceDoor station Setting the date and time MonitorMenu Door KEY TALK/OFF Answering a call by voice sensor Voice answer mode When using an additional door stationAnswering a call Adjusting the speaker volume Features during a call or while monitoringAdjusting the display brightness Using Door KEY buttonWhen answering a call When installing 2 door stations Monitoring the outside Door station monitorMonitor Menu TALK/OFF Auto recording NAuto image updateRecording an image To view recorded imagesManual recording PlayViewing recorded images Menu SelectNTo view the next image Unplayed Recording number Recording date and timeAdjusting the ringer volume MenuSound Changing the ringer toneRinger tone patterns Sound 1 RepeatSetting Door KEY button SettingCurrent Function list Changing the function settings Function listHow to change the function settings Monitor MenuTiming RECORDING/PLAY Settings Play Lamp YES, no FlashingPicture Record Display ALWAYS, 3 SEC Recording DateDelete ALL Delete ALL PICTURES, Back Pictures Other Settings Operation ON, OFF Guide SettingsDemo Mode LobbyExpanding your system with optional units System components as of November Video intercom systemOperating the door opener Units required to be installed Adding a door stationUsing with Panasonic PBX Please use only a Panasonic PBXTroubleshooting Monitor display Problem Cause & SolutionConversation Problem Cause & Solution Station does not sound Others Problem Cause & SolutionCleaning Specifications Main monitor station VL-MV30BXDoor station VL-V566BX Lvoice Answer Lplay Lamp Flashing Function Settings Ltime and Date SettingsLinitialize Settings Ldemo Mode Guide OFF Incoming VOLPage For your future reference Attach your sales receipt here