Panasonic VL-SV30BX, VL-MV30BX Changing the ringer tone, Ringer tone patterns, Sound 1 Repeat

Page 19

Programming

Changing the ringer tone

You can change the ringer tone that is heard when receiving calls from the door station by using the main monitor station.

{MONITOR}

{MENU}

{TALK/OFF}

1 Press {MENU}, then select “RING/ANSWERING SETTINGS” by pressing {MENU} (▲SELECT).

2 Press {MONITOR} (OK), then select “RING TONE” by pressing {MENU} (▲SELECT).

FUNCTION SETTINGS

TIME AND DATE SETTINGS RING/ANSWERING SETTINGS RECORDING/PLAY SETTINGS

RING/ANSWERING SETTINGS

RING VOLUME

RING TONE

3 Press {MONITOR} (OK), then select the desired door station
			DOOR STATION 1
by pressing {MENU} (▲SELECT).			DOOR STATION 2

4 Press {MONITOR} (OK), then select the desired ringer tone
			RING TONE/DOOR STATION 1
by pressing {MENU} (▲SELECT).		●
			SOUND 1

			SOUND 1	(REPEAT)
Current
		SOUND 2		(REPEAT)
setting		SOUND 2

5 Press {MONITOR} (OK).

L“r” moves to the selected item.

6 To end the operation, press {TALK/OFF}.

N Ringer tone patterns

The default settings are: Door station 1 “SOUND 1”, Door station 2 “SOUND 2”

	Ringer tone for calls from the door station
	SOUND 1	*1 The selected tone rings about every 5 seconds.
	SOUND 1 (REPEAT)*1	However, the ringer tone heard at the door station
		or the ringer tone when receiving another call
	SOUND 2	or the ringer tone when receiving another call
	SOUND 2	does not ring repeatedly.
	SOUND 2 (REPEAT)*1
	SOUND 3
	SOUND 3 (REPEAT)*1

19

Image 19

Contents Thank you for purchasing a Panasonic product Attached Installation GuideRecording IntroductionImportant Information PreparationWhen using with a lobby station Accessory informationAdditional/replacement accessories Accessory items Order numberOperating safeguards For your safetyPower connection InstallationFor best performance Important safety instructionsOther information Main monitor station Location of controlsButton guidance Monitor displayOperation guidance and button guidance Operation guidanceDoor station Monitor Setting the date and timeMenu Door KEY TALK/OFF When using an additional door station Answering a call by voice sensor Voice answer modeAnswering a call Using Door KEY button Features during a call or while monitoringAdjusting the display brightness Adjusting the speaker volumeWhen answering a call Monitoring the outside Door station monitor When installing 2 door stationsMonitor Menu TALK/OFF To view recorded images NAuto image updateRecording an image Auto recordingPlay Manual recordingMenu Select Viewing recorded imagesNTo view the next image Recording number Recording date and time UnplayedMenu Adjusting the ringer volumeSound 1 Repeat Changing the ringer toneRinger tone patterns SoundSetting Setting Door KEY buttonCurrent Monitor Menu Changing the function settings Function listHow to change the function settings Function listDisplay ALWAYS, 3 SEC Recording Date RECORDING/PLAY Settings Play Lamp YES, no FlashingPicture Record TimingLobby Other Settings Operation ON, OFF Guide SettingsDemo Mode Delete ALL Delete ALL PICTURES, Back PicturesSystem components as of November Video intercom system Expanding your system with optional unitsPlease use only a Panasonic PBX Units required to be installed Adding a door stationUsing with Panasonic PBX Operating the door openerMonitor display Problem Cause & Solution TroubleshootingStation does not sound Others Problem Cause & Solution Conversation Problem Cause & SolutionCleaning Main monitor station VL-MV30BX SpeciﬁcationsDoor station VL-V566BX Incoming VOL Function Settings Ltime and Date SettingsLinitialize Settings Ldemo Mode Guide OFF Lvoice Answer Lplay Lamp FlashingPage Attach your sales receipt here For your future reference