Panasonic VL-MV30BX, VL-SV30BX operating instructions Setting Door KEY button, Current

Page 20

Programming

Setting {DOOR KEY} button

When a separate door opener is connected to the main monitor station, you can open the door using the main monitor station. You can also select how long the door remains open. If you do not use the door opener, select “NOT CONNECTED”.

LThe default setting is “5 SEC OPEN”.

{MONITOR}

{MENU}

{TALK/OFF}

1 Press {MENU}, then select “CONNECTED DEVICE SETTINGS” by pressing {MENU} (▲SELECT).

FUNCTION SETTINGS

TIME AND DATE SETTINGS RING/ANSWERING SETTINGS RECORDING/PLAY SETTINGS CONNECTED DEVICE SETTINGS

2 Press {MONITOR} (OK), then select “DOOR KEY” by pressing {MENU} (▲SELECT).

CONNECTED DEVICE SETTINGS

DOOR STATION CONNECTION LOBBY CONNECTION

DOOR KEY

3 Press {MONITOR} (OK), then select the door opener to be set by pressing {MENU} (▲SELECT).

DOOR KEY

DOOR KEY 1

DOOR KEY 2

4 Press {MONITOR} (OK), then select the desired item by pressing {MENU} (▲SELECT).

5 Press {MONITOR} (OK).

L“r” moves to the selected item.

6 To end the operation, press {TALK/OFF}.

Note:

				DOOR KEY 1
		2		SEC OPEN
		3		SEC OPEN
		4		SEC OPEN
		●	5 SEC OPEN

			6	SEC OPEN
Current
		7 SEC OPEN
setting		NOT CONNECTED

LAfter setting the {DOOR KEY} button, conﬁrm that the door can be properly locked/unlocked depending on the status of the door opener. If needed, change the time how long the door remains open by performing the steps above again.

20

Image 20

Contents Attached Installation Guide Thank you for purchasing a Panasonic productIntroduction Important InformationPreparation RecordingAccessory information Additional/replacement accessoriesAccessory items Order number When using with a lobby stationFor your safety Power connectionInstallation Operating safeguardsOther information Important safety instructionsFor best performance Location of controls Main monitor stationMonitor display Operation guidance and button guidanceOperation guidance Button guidanceDoor station Menu Door KEY TALK/OFF Setting the date and timeMonitor Answering a call Answering a call by voice sensor Voice answer modeWhen using an additional door station Features during a call or while monitoring Adjusting the display brightnessAdjusting the speaker volume Using Door KEY buttonWhen answering a call Monitor Menu TALK/OFF When installing 2 door stationsMonitoring the outside Door station monitor NAuto image update Recording an imageAuto recording To view recorded imagesManual recording PlayNTo view the next image Viewing recorded imagesMenu Select Unplayed Recording number Recording date and timeAdjusting the ringer volume MenuChanging the ringer tone Ringer tone patternsSound Sound 1 RepeatCurrent Setting Door KEY buttonSetting Changing the function settings Function list How to change the function settingsFunction list Monitor MenuRECORDING/PLAY Settings Play Lamp YES, no Flashing Picture RecordTiming Display ALWAYS, 3 SEC Recording DateOther Settings Operation ON, OFF Guide Settings Demo ModeDelete ALL Delete ALL PICTURES, Back Pictures LobbyExpanding your system with optional units System components as of November Video intercom systemUnits required to be installed Adding a door station Using with Panasonic PBXOperating the door opener Please use only a Panasonic PBXTroubleshooting Monitor display Problem Cause & SolutionConversation Problem Cause & Solution Station does not sound Others Problem Cause & SolutionCleaning Door station VL-V566BX SpeciﬁcationsMain monitor station VL-MV30BX Function Settings Ltime and Date Settings Linitialize Settings Ldemo Mode Guide OFFLvoice Answer Lplay Lamp Flashing Incoming VOLPage For your future reference Attach your sales receipt here