Panasonic VL-SV30BX, VL-MV30BX Changing the function settings Function list, Monitor Menu

Page 21

Programming

Changing the function settings (Function list)

How to change the function settings

{MONITOR}

{MENU}

Note:

1 Press {MENU}, then select the desired item by pressing {MENU} (▲SELECT).

2 Press {MONITOR} (OK), then select the desired item by pressing {MENU} (▲SELECT).

3 Press {MONITOR} (OK), then select the desired setting by pressing {MENU} (▲SELECT).

LIn some functions, repeat this operation according to the display instructions.

{TALK/OFF} 4 Press {MONITOR} (OK).

5 To end the setting, press {TALK/OFF}.

LWhen receiving a call while setting or no operation is done for about 90 seconds, the setting function screen automatically quits.

Function list

The default setting is indicated in bold.

Item (function)		Setting
TIME AND DATE		LYou can set the current date and time (page 9).
SETTINGS

RING/ANSWERING SETTINGS

	RING VOLUME	HIGH, MEDIUM, LOW, OFF
		LYou can select the ringer volume of the main monitor station (page 18).

	RING TONE	DOOR STATION 1: SOUND 1, SOUND 1	(REPEAT),
		SOUND 2, SOUND 2	(REPEAT),
		SOUND 3, SOUND 3	(REPEAT)
		DOOR STATION 2: SOUND 1, SOUND 1	(REPEAT),
		SOUND 2, SOUND 2	(REPEAT),
		SOUND 3, SOUND 3	(REPEAT)
		LYou can select the ringer tone of the main monitor station for calls from the
		door station (page 19).

	VOICE ANSWER	ON, OFF
		LYou can answer a call from the door station by answering with a clear voice
		such as “Yes?” or “Hello?” unless you press {TALK/OFF} (page 10).
		– Even if “ON” is selected, you can answer a call by pressing {TALK/OFF}.

21

Image 21

Contents Thank you for purchasing a Panasonic product Attached Installation GuideImportant Information IntroductionPreparation RecordingAdditional/replacement accessories Accessory informationAccessory items Order number When using with a lobby stationPower connection For your safetyInstallation Operating safeguardsImportant safety instructions For best performanceOther information Main monitor station Location of controlsOperation guidance and button guidance Monitor displayOperation guidance Button guidanceDoor station Setting the date and time MonitorMenu Door KEY TALK/OFF Answering a call by voice sensor Voice answer mode When using an additional door stationAnswering a call Adjusting the display brightness Features during a call or while monitoringAdjusting the speaker volume Using Door KEY buttonWhen answering a call When installing 2 door stations Monitoring the outside Door station monitorMonitor Menu TALK/OFF Recording an image NAuto image updateAuto recording To view recorded imagesPlay Manual recordingViewing recorded images Menu SelectNTo view the next image Recording number Recording date and time UnplayedMenu Adjusting the ringer volumeRinger tone patterns Changing the ringer toneSound Sound 1 RepeatSetting Door KEY button SettingCurrent How to change the function settings Changing the function settings Function listFunction list Monitor MenuPicture Record RECORDING/PLAY Settings Play Lamp YES, no FlashingTiming Display ALWAYS, 3 SEC Recording DateDemo Mode Other Settings Operation ON, OFF Guide SettingsDelete ALL Delete ALL PICTURES, Back Pictures LobbySystem components as of November Video intercom system Expanding your system with optional unitsUsing with Panasonic PBX Units required to be installed Adding a door stationOperating the door opener Please use only a Panasonic PBXMonitor display Problem Cause & Solution TroubleshootingStation does not sound Others Problem Cause & Solution Conversation Problem Cause & SolutionCleaning Speciﬁcations Main monitor station VL-MV30BXDoor station VL-V566BX Linitialize Settings Ldemo Mode Guide OFF Function Settings Ltime and Date SettingsLvoice Answer Lplay Lamp Flashing Incoming VOLPage Attach your sales receipt here For your future reference