Panasonic VL-SW250BX Changing the ringer tone, Main monitor station Sub monitor station

Page 34

Programming

Changing the ringer tone

You can change the ringer tone that is heard when receiving calls from the door station by using the main monitor station or the sub monitor station. (The ringer tone of the paging call cannot be changed.)

Main monitor station

Sub monitor station

1 Press {MENU}, then select “RING TONE

1 Press {MENU}, then select “RING TONE” by

SETTINGS” by pressing {VOLUME} (▲) or

pressing {▲} or {▲}.

{PAGE} (▲).

2 Press {D} (OK), then select the desired door

2 Press {MENU} (OK), then select “RING TONE” by

station by pressing {▲} or {▲}.

pressing {VOLUME} (▲) or {PAGE} (▲).

DOOR 1

3 Press {MENU} (OK), then select the desired door

DOOR 2

3 Press {D} (OK), then select the desired ringer tone

station by pressing {VOLUME} (▲) or

{PAGE} (▲).

by pressing {▲} or {▲}.

DOOR STATION 1

TONE/DOOR1

DOOR STATION 2

1/6

4 Press {MENU} (OK), then select the desired ringer

●

SOUND1

SOUND1 REPEAT

Current

tone by pressing {VOLUME} (▲) or {PAGE} (▲).

SOUND2

setting

●

RING TONE/DOOR STATION 1

SOUND2 REPEAT

LThe selected ringer tone sounds.

SOUND 1

SOUND 1 (REPEAT)

LThe ringer tone sounds just once in this step

Current

SOUND 2

even if you select “REPEAT”.

setting

SOUND 2 (REPEAT)

4 Press {D} (OK).

LThe selected ringer tone sounds.

LThe ringer tone sounds just once in this step

L“r” moves to the selected item.

even if you select “(REPEAT)”.

5 To end the operation, press {OFF}.

5 Press {MENU} (OK).

L“r” moves to the selected item.

6 To end the operation, press {OFF}.

N Ringer tone patterns

The default settings are: Door station 1 “SOUND 1”, Door station 2 “SOUND 2”

Ringer tone for calls from the door station

SOUND 1

SOUND 1 (REPEAT)*1

SOUND 2

SOUND 2 (REPEAT)*1

SOUND 3

SOUND 3 (REPEAT)*1

*1 The selected tone rings about every 5 seconds. However, the ringer tone heard at the door station or the ringer tone when receiving another call does not ring repeatedly.

34

SW250BX_OI.indb 34

2010/08/25 15:58:36

Image 34

Contents Attached Installation Guide Thank you for purchasing a Panasonic productPreparation IntroductionImportant Information DoorphoneIncluded items Accessory informationProduct names used in these Operating Instructions VL-SW250BXWhen using with a lobby station Additional/replacement accessoriesAccessory items Order number Compatible Panasonic PBXsInstallation For your safetyPower connection Operating safeguardsInstallation and relocation Important safety instructionsBattery For best performance Before usingEnvironment Privacy and rights of portrait Other informationTapping OthersLocation of controls Door stationMain monitor station Display during operation Press Volume dMonitor display Main monitor station Operation guidanceSub monitor station Charge contacts Battery coverRear view Speaker Charge contacts Metallic parts Charger Charger standMonitor display Sub monitor station OFFBack Next LImages on the monitor displayTo assemble the charger stand Charging the sub monitor stationPad at the back To remove the charger standVolume Voice Changer Setting the date and timeVoice Changer Next Answering a call Answering a call by voice sensor Voice answer modeWhen using an additional door station MicrophoneAdjusting the speaker volume Main monitor station Features during a call or while monitoringAdjusting the display brightness Main monitor station Main monitor station onlySpeak while pressing and holding Talk Using Door KEY buttonTo speak to the visitor To hear the visitorTo transfer a call VolumeTransferring a call To receive a transferred callMonitor OFF Talk When answering a callMonitor Talk OFF NTo speak to the other partyMonitoring the outside Door station monitor When installing 2 door stationsPress Volume or page , then MonitorAuto recording NAuto image updateRecording an image PLAY/RECPress PLAY/REC Manual recordingPress D REC Voice Changer Menu Volume OFF Viewing recorded images using the main monitor stationNTo view the next image Menu Play Voice Changer BackMenu Pause Menu MenuViewing recorded images using the sub monitor station NTo view a series of 8 continuous imagesImage status Button and guidance Operation BackSelect Volume MenuProtecting the recorded images To release protectionYou can erase unnecessary images Press Volume YESErasing an image Menu OFFCaller Receiver Volume Menu OFFOFF Talk Adjusting the ringer volume Ringer tone patterns Changing the ringer toneMain monitor station Sub monitor station Sound Sound 1 REPEAT*1 Sound 2 REPEAT*1 Sound 3 REPEAT*1Volume or Setting Door KEY buttonPress Menu OK, then select Door KEY by pressing Volume or Press Menu OK, then select the desired item by pressingFunction list of the main monitor station How to change the function settingsItem function Setting Time and DateNORMAL, LOW PICTURES, 1 PictureLobby Terminal 2 SIGNALS, 2 Terminals 1 SignalExternal Device REGISTRATION/CANCELLATION Registration Cancellation Demo ModeFunction list of the sub monitor station Ring Volume Door HIGH, MEDIUM, LOW, OFFStation Disp REC Date ALWAYS, 3 SEC Init Settings YES, noVoice Answer ON, OFF ContrastExpanding your system with optional units Sub monitor station*1 Door station*1 Main monitor stationOperating the door opener Units required to be installed Adding a door stationUsing with Panasonic PBX Please use only a Panasonic PBXTo register a canceled sub monitor station page 46 again Using the main monitor stationUsing the sub monitor station Adding a sub monitor station RegistrationStatus indicator Setting a repeater RegistrationTo power outlet 100 240 V AC ProgramCanceling registration of the sub monitor station/repeater CancellationMonitor display Problem Cause & Solution TroubleshootingAway from those appliances. Try again Conversation Doorphone/Intercom Problem Cause & Solution Problem Cause & SolutionRinger tone Problem Cause & Solution Others Problem Cause & Solution Sub monitor station/Battery Problem Cause & SolutionRemove the battery and insert it again Help Error messages Sub monitor station only Problem Cause & SolutionCleaning Battery replacementSub monitor station VL-W605BX SpeciﬁcationsMain monitor station VL-MW250BX Door station VL-V566BXLvoice Answer Lvoice Changer Lplay Lamp Flashing Function SettingsLring Volume Lring Tone Lcontrast LregistrationLoutgoing VOL For your future reference Attach your sales receipt here